ikkalebob / NM-bionic-handLinks
☆343Updated 4 years ago
Alternatives and similar repositories for NM-bionic-hand
Users that are interested in NM-bionic-hand are comparing it to the libraries listed below
Sorting:
- ☆193Updated last year
- ☆178Updated last year
- OpenTorque Actuator: A powerful, compliant actuator for legged robotics.☆341Updated 6 years ago
- All files for 6 axis robot arm with cycloidal gearboxes .☆708Updated last year
- ☆233Updated 2 years ago
- 3d printable Robot arm☆358Updated 3 years ago
- A cycloid gear graphical calculator to design cycloidal drives.☆117Updated 3 years ago
- ☆418Updated 2 years ago
- This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.☆227Updated 4 years ago
- TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot☆259Updated last year
- Open source 3D printed Robotic Actuator☆75Updated last year
- The build files for the Dexhand☆370Updated 10 months ago
- DIY 3D Printable Robotic Arm☆1,063Updated 3 weeks ago
- ☆68Updated last year
- Files and intro page for first version of CM6 COBOT robotic arm☆210Updated 11 months ago
- Collection of Robotic Arms and related resources☆142Updated last year
- ☆474Updated 10 months ago
- Hardware and Software for an Open Source Robotic Leg☆80Updated last year
- ☆407Updated 11 months ago
- SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…☆39Updated 4 years ago
- A cycloidal reduction drive generator script for Fusion360☆113Updated 4 years ago
- Reaction wheel inverted pendulum project based on the Arduino Simple FOC library and SimpleFOC shied.☆131Updated last year
- The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.☆352Updated 11 months ago
- A 3D Printed Quadrupedal Robot for Locomotion Research.☆105Updated 2 years ago
- My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…☆343Updated 6 months ago
- One forth scale model of the KUKA KR350 model 3D printed and Arduino controlled.☆45Updated 3 years ago
- Fusion360 script for creating Cycloidal Drive sketch☆130Updated 2 years ago
- ☆85Updated 3 years ago
- Open Source 3D Printed Robotic Arm for educational purposes☆1,552Updated 3 years ago
- Four Legged robot design☆84Updated last year