firestartboy / Arduino-ESP32-FLinks
Arduino+ESP32-F实现蓝牙控制、光电寻迹、超声波避障功能的智能小车
☆10Updated 3 years ago
Alternatives and similar repositories for Arduino-ESP32-F
Users that are interested in Arduino-ESP32-F are comparing it to the libraries listed below
Sorting:
- 一款借鉴于robotiq设计的二指自适应夹爪☆79Updated 9 months ago
- 通过摄像头进行手势识别,控制vrep仿真机械臂☆70Updated 6 years ago
- ☆58Updated 2 years ago
- 基于stm32的六轴机械臂控制+open mv颜色识别,识别不同的物块分放☆28Updated 3 years ago
- ☆127Updated 3 years ago
- openmv卡尔曼滤波多目标追踪☆31Updated 3 years ago
- ☆47Updated last year
- A low-cost 6DoF hand exoskeleton using linkage and tendon mechanism under ESP32. 一个低成本6自由度 的手部外骨骼,用连杆驱动四指,用线驱模拟肌腱机制驱动大拇指,主控是ESP32,动力源是七个S…☆73Updated 3 weeks ago
- 应B站网友需求,将此次2024电赛E题上下位机代码开源,共同交流进步☆13Updated last year
- A set of six axis gripper robotic arm based on DM actuator.☆100Updated 5 months ago
- This repository contains the ros2 packages and python scripts for liberhand (V2).☆39Updated last year
- 第二十一届RoboMaster机甲大师赛-通用程序框架 NEFU东北林业大学-Ares战队 空中机器人六轴无人机云台开源框架 🏆☆38Updated 2 years ago
- This project is based on a Kinova robotic arm URDF converted to an MJCF format for MuJoCo simulation. It integrates Pinocchio for dynamic…☆93Updated 9 months ago
- ROS1 implementation of Foundation Pose for model-based 6DoF pose tracking☆18Updated last year
- ☆25Updated 6 months ago
- ☆26Updated last month
- Official support TITA Reinforcement Learning repo☆125Updated 3 months ago
- 使用UR5机械臂&AG95夹爪执行给定位姿的抓取☆47Updated 3 years ago
- 开源六轴协作机械臂系统,包含机械结构、电路和软件☆62Updated this week
- ☆72Updated 2 months ago
- RL-Boy Reinforcement Kid is a small-sized open-source robot project and a full-stack open-source scaled-down humanoid robot project.☆75Updated 6 months ago
- A Robotic Arm for Learning Kinematics and Dynamics☆26Updated last year
- a 12-DOF quadruped robot design☆119Updated 3 years ago
- The aim of this project is to use Moveit and Gazebo in ROS to jointly simulate the basic and collaborative simulation of Yumi dual arm ro…☆18Updated last year
- ☆92Updated 4 months ago
- 机械臂定位抓取☆162Updated 2 years ago
- 在Ubuntu20.04(×86)+ ros1-noetic环境下,使用了ros_control和ros_canopen功能包,完成了can通讯驱动maxon电机,实现了对下肢外骨骼机器人的ppm、pvm、csp三种模式的控制☆33Updated last year
- 基于GG-CNN预测每个像素的抓取质量和姿态,通过机器人仿真软件Gazebo实时观察待抓取物体的抓取点。抓取数据集使用康奈尔数据集以及提花数据集;基于kinova机器人搭建实际抓取环境;进行机械臂的手眼标定(Eye-in-Hand);基于pybullet平台仿真实现多个目标…☆19Updated 3 years ago
- 本项目是基于pybullet和stable baseline3 的法奥机械臂的强化学习抓取训练代码☆199Updated 2 weeks ago
- ROS2 was developed for the Realman robot (http://www.realman-robotics.com/).☆144Updated last month