circuitvalley / USB_C_Industrial_Camera_FPGA_USB3Links
Source and Documentation files for USB C Industrial Camera Project, This repo contains PCB boards, FPGA , Camera and USB along with FPGA Firmware and USB Controller Firmware source.
☆1,003Updated last year
Alternatives and similar repositories for USB_C_Industrial_Camera_FPGA_USB3
Users that are interested in USB_C_Industrial_Camera_FPGA_USB3 are comparing it to the libraries listed below
Sorting:
- MIPI CSI-2 Camera Sensor Receiver verilog HDL implementation For any generic FPGA. Tested with IMX219 on Lattice MachXO3LF. 2Gbps UVC Vid…☆430Updated 3 years ago
- ThunderScope GitHub Repo☆1,131Updated last week
- Open Source 4k CSI-2 Rx core for Xilinx FPGAs☆402Updated 6 years ago
- A 5$ Xilinx ZYNQ development board.☆700Updated 4 years ago
- An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA comm…☆800Updated 8 months ago
- Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB oscilloscope☆232Updated last week
- Send video/audio over HDMI on an FPGA☆1,197Updated last year
- Open source Raspberry Pi 5 compatible Micro Four Thirds camera module based on IMX294☆259Updated last month
- A IMX585 camera board designed for Raspberry Pi☆196Updated last month
- ☆320Updated 2 weeks ago
- current focus on Colorlight i5 and i9 & i9plus module☆304Updated last month
- ngscopeclient and other client applications for libscopehal.☆741Updated this week
- An FPGA-based Field Oriented Control (FOC) for driving BLDC/PMSM motor. 基于FPGA的FOC控制器,用于驱动BLDC/PMSM电机。☆747Updated last year
- 32x IMU array sensor board based on ICM-42688-P and ICE40UP5K☆282Updated 9 months ago
- iCESugar FPGA Board (base on iCE40UP5k)☆401Updated last month
- Arduino MIPI DSI Shield☆506Updated 6 years ago
- Open Logic FPGA Standard Library☆737Updated last week
- Universal utility for programming FPGA☆1,390Updated 3 weeks ago
- Project Apicula 🐝: bitstream documentation for Gowin FPGAs☆583Updated last week
- Project F brings FPGAs to life with exciting open-source designs you can build on.☆718Updated 7 months ago
- Raspberry Pico powered Xilinx Virtual Cable - Xilinx JTAG Cable! This is now quite fast, thanks to tom01h! We also support JTAG + serial …☆437Updated 10 months ago
- TangNano-9K-example project☆278Updated last year
- SatCat5 is a mixed-media Ethernet switch that lets a variety of devices communicate on the same network.☆464Updated last month
- Open source nanovoltmeter☆418Updated 9 months ago
- ECP5 breakout board in a feather physical format☆503Updated 9 months ago
- 100kHz to 6GHz 2 port USB based VNA☆1,361Updated this week
- Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX☆495Updated last year
- A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi☆269Updated 10 months ago
- 720p FPGA Media Player (RISC-V + Motion JPEG + SD + HDMI on an Artix 7)☆282Updated 4 years ago
- List of FPGA Lattice boards using open tools☆330Updated 2 months ago