Alternatives and similar repositories for BallContraption

Users that are interested in BallContraption are comparing it to the libraries listed below

• siteswapjuggler / RAMP
  Arduino Interpolation Library
  ☆150Updated last year
• SovGVD / esp32-robot-dog-code
  WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories
  ☆138Updated 3 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆233Updated 5 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆51Updated 6 years ago
• XRobots / ServoSmoothing
  ☆201Updated 4 years ago
• neuroprod / InsectRobotSimulation
  hexapod
  ☆306Updated last year
• XRobots / ROSremote
  ☆35Updated 3 years ago
• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆56Updated last year
• alexandrospetkos / quad
  Four Legged robot design
  ☆93Updated 2 years ago
• avbotics / Spot-Micro-Control-and-Animation
  Inverse Kinematics based control and animation of Spotmicro developped in Python for Raspeberry Pi
  ☆135Updated 4 years ago
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆66Updated 2 years ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 5 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆72Updated 4 years ago
• AliShug / EvoArm
  An open-source 3D-printable robotic arm
  ☆153Updated 6 years ago
• mahowik / BalancingWii
  Self balancing robot (Segway) based on modified/extended MultiWii 2.3 firmware.
  ☆288Updated 4 months ago
• aakieu / 3-dof-planar
  Forward and Inverse Kinematics for a 3 Degree of Freedom Planar Robot
  ☆38Updated 6 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆364Updated last year
• XRobots / miniDog
  ☆56Updated 5 years ago
• XRobots / CycloidalDrive
  ☆209Updated last year
• XRobots / openDogV2
  ☆237Updated 3 years ago
• roTechnic / Robot-Arm
  ☆78Updated last year
• NikodemBartnik / LIDAR-Robot
  ☆74Updated 3 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆43Updated 8 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆57Updated 3 years ago
• raspibotics / MABEL
  MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.
  ☆182Updated 5 years ago
• cgxeiji / CGx-InverseK
  Inverse Kinematic Library for Arduino for a three link-arm system with a rotating base.
  ☆73Updated 5 years ago
• Seeed-Studio / Seeed_Arduino_AS5600
  The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.
  ☆122Updated last year
• XRobots / ReallyUsefulRobot
  ☆209Updated last year
• roTechnic / Cheats6DOFInverseKinematics
  Using IKPY to do Inverse kinematics for a 6DOF arm
  ☆46Updated 3 years ago
• anoochit / arduino-quadruped-robot
  Arduino Quadruped Robot, Spider Robot
  ☆116Updated 9 years ago