Alternatives and similar repositories for miniDog

Users that are interested in miniDog are comparing it to the libraries listed below

• alexandrospetkos / quad
  Four Legged robot design
  ☆93Updated 2 years ago
• G-Levine / OpenTorque-Actuator
  OpenTorque Actuator: A powerful, compliant actuator for legged robotics.
  ☆393Updated 6 years ago
• jkirsons / stealth-controller
  ☆91Updated 4 years ago
• miguelasd688 / 4-legged-robot-model
  ☆258Updated 4 years ago
• XRobots / CycloidalDrive
  ☆211Updated 2 years ago
• neuroprod / InsectRobotSimulation
  hexapod
  ☆309Updated last year
• avbotics / Spot-Micro-Control-and-Animation
  Inverse Kinematics based control and animation of Spotmicro developped in Python for Raspeberry Pi
  ☆139Updated 4 years ago
• byDagor / Dagor-Brushless-Controller
  The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.
  ☆374Updated 6 months ago
• XRobots / BallContraption
  ☆77Updated 4 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆369Updated last year
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆66Updated 2 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆73Updated 4 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆82Updated 2 years ago
• maartenweyn / SpotMicro_ESP32
  ☆42Updated 5 years ago
• mawildoer / cycloidal_generator
  A cycloidal reduction drive generator script for Fusion360
  ☆121Updated 5 years ago
• raspibotics / MABEL
  MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.
  ☆182Updated 5 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆58Updated 3 years ago
• aaedmusa / TOPS
  TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot
  ☆285Updated 2 years ago
• XRobots / openDogV2
  ☆238Updated 3 years ago
• cguweb-com / Arduino-Projects
  ☆151Updated last year
• XRobots / ROSremote
  ☆35Updated 3 years ago
• simplefoc / Arduino-FOC-reaction-wheel-inverted-pendulum
  Reaction wheel inverted pendulum project based on the Arduino Simple FOC library and SimpleFOC shied.
  ☆147Updated 2 years ago
• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆56Updated last year
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆132Updated 5 years ago
• adham-elarabawy / open-quadruped
  An open-source 3D-printed quadrupedal robot. Intuitive gait generation through 12-DOF Bezier Curves. Full 6-axis body pose manipulation. …
  ☆453Updated last year
• ongdexter / ar3_core
  Core software with ROS and MoveIt for the AR3 robotic arm
  ☆120Updated 4 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆130Updated 7 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆232Updated 5 years ago
• KoshiroRobot / Ball-Balancing-Robot
  Ball Balance Robot Parts File and Program
  ☆223Updated last year
• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆131Updated 4 years ago