Alternatives and similar repositories for ROSremote

Users that are interested in ROSremote are comparing it to the libraries listed below

• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆49Updated 2 years ago
• XRobots / Navigation-Unit
  ☆39Updated 4 years ago
• XRobots / ReallyUsefulRobot
  ☆204Updated last year
• makerspet / makerspet_loki
  Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform
  ☆46Updated 4 months ago
• roTechnic / Robot-Arm
  ☆68Updated last year
• XRobots / SonicRobot
  ☆29Updated 2 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆81Updated last year
• hoverboard-robotics / hoverboard-driver
  ROS hardware driver for UART-controlled hoverboard
  ☆109Updated 2 weeks ago
• AngelLM / Asgard
  GUI for Thor developed using PyQt5
  ☆25Updated 3 years ago
• roaldlemmens / morph
  MORPH : Modular Open Robotics Platform for Hackers
  ☆45Updated 6 years ago
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆63Updated 5 years ago
• alex-makarov / robaka-ros
  ROS project for Robaka - mobile ROS testbed
  ☆77Updated 2 years ago
• Settorezero / Arlok
  Arlok is a 3D-printed Arduino Robot based on Arduino UNO
  ☆19Updated 6 months ago
• mjbots / hoverbot
  Simple balancing hoverboard robot
  ☆43Updated 3 weeks ago
• XRobots / miniDog
  ☆55Updated 5 years ago
• kaiaai / kaiaai
  ROS2 package for Kaia.ai robots
  ☆26Updated 2 months ago
• Reinbert / ros_esp32cam_diffdrive
  This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.
  ☆70Updated last year
• RBinsonB / Nox_robot
  Nox robot project
  ☆98Updated 4 years ago
• LuSeKa / HoverBot
  Self-balancing robot using hoverboard hub motors
  ☆115Updated 3 years ago
• sachin0x18 / rosserial_esp32
  rosserial on ESP32 based on ESP-IDF
  ☆43Updated 2 years ago
• linorobot / linorobot2_hardware
  ☆127Updated 4 months ago
• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆48Updated 5 months ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆75Updated last year
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆65Updated 2 years ago
• AustinOwens / robodog
  Robotic quadruped project.
  ☆40Updated last year
• mjbots / power_dist
  ☆13Updated 4 months ago
• tve / lx16a-servo
  Simple ESP32-Arduino library to operate LX-16A serial servos
  ☆24Updated last year
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆74Updated last year
• mjbots / pi3hat
  ☆42Updated 3 months ago