Alternatives and similar repositories for tangyRiscVSOC

Users that are interested in tangyRiscVSOC are comparing it to the libraries listed below

• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆151Updated 9 months ago
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆90Updated 3 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆50Updated 2 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆66Updated 2 years ago
• machdyne / qqspi
  QQSPI Pmod-compatible 32MB PSRAM module
  ☆15Updated 2 years ago
• hi631 / tang-nano-9K
  ☆107Updated 2 years ago
• fredrequin / verilator_gowin
  Re-coded Gowin GW1N primitives for Verilator use
  ☆20Updated 3 years ago
• zerkman / zhdmi
  A complete HDMI transmitter implementation in VHDL
  ☆21Updated 6 months ago
• nand2mario / sdram-tang-nano-20k
  NESTang SDRAM controller and usage example for Tang Nano 20K
  ☆49Updated last year
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆62Updated last year
• splinedrive / fpga_rtc_alarm_clock
  fpga i2c rtc oled based clock with alarm supports buzzer
  ☆16Updated 4 years ago
• calint / tang-nano-9k--riscv--cache-psram
  RISC-V implementation of RV32I for FPGA board Tang Nano 9K utilizing on-board burst PSRAM, flash and SD card
  ☆45Updated 3 months ago
• emeb / up5k_vga
  A complete 65C02 computer with VGA output on a Lattice Ultra Plus FPGA
  ☆29Updated 6 years ago
• TheSonders / USBKeyboard
  Interfaz directa con teclados USB en Verilog con control de los Leds de teclado y conversión a PS/2.
  ☆18Updated 3 years ago
• robfinch / Cores
  ☆75Updated 6 months ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆104Updated 4 months ago
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆24Updated 3 years ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆41Updated 3 years ago
• MichaelBell / nanoV
  RISC-V RV32E core designed for minimal area
  ☆23Updated last year
• abnoname / iceZ0mb1e
  FPGA 8-Bit TV80 SoC for Lattice iCE40 with complete open-source toolchain flow using yosys and SDCC
  ☆58Updated 2 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• splinedrive / kianFpgaPong
  Basic Pong you can extend with rotary, sound, vga generator and autopilot
  ☆11Updated 4 years ago
• lmEshoo / sp-i586
  soft processor core compatible with i586 instruction set(Intel Pentium) developped on Nexys4 board boots linux kernel with a ramdisk cont…
  ☆34Updated 9 years ago
• ChinaQMTECH / QM_XC7A100T_WUKONG_BOARD
  ☆37Updated last year
• DECAfpga / DECA_board
  Documentation and tools related to DECA FPGA board
  ☆22Updated 2 years ago
• nockieboy / gpu
  Collaborative project to create an advanced GPU, with additional features to flesh-out the peripherals for a home-made, DIY computer.
  ☆17Updated 2 years ago
• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆44Updated 5 years ago
• riktw / tang4Kramblings
  ☆21Updated 4 years ago
• mcleod-ideafix / simple_sdram_controller
  A very simple SDRAM controller for FPGA written in Verilog. It exposes a SRAM-like interface to the rest of the FPGA fabric
  ☆14Updated 7 years ago
• ChinaQMTECH / EP4CGX150DF27_CORE_BOARD
  ☆18Updated 3 years ago