Alternatives and similar repositories for psram-tang-nano-9k

Users that are interested in psram-tang-nano-9k are comparing it to the libraries listed below

• hi631 / tang-nano-9K
  ☆90Updated 2 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆55Updated last year
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆126Updated 2 months ago
• nand2mario / sdram-tang-nano-20k
  NESTang SDRAM controller and usage example for Tang Nano 20K
  ☆40Updated 7 months ago
• MJoergen / HyperRAM
  Portable HyperRAM controller
  ☆55Updated 5 months ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆98Updated last year
• qubeck78 / tangyRiscVSOC
  RiscV based SOC with 2D and 3D graphics acceleration for Tang Nano 20K
  ☆36Updated last year
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆24Updated 2 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆47Updated last year
• laurentiuduca / openverifla
  ☆17Updated 2 years ago
• hi631 / tang-nano-4K
  tang-nano-4K mini samples
  ☆13Updated 3 years ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆88Updated 6 years ago
• calint / tang-nano-9k--riscv--cache-psram
  RISC-V implementation of RV32I for FPGA board Tang Nano 9K utilizing on-board burst PSRAM, flash and SD card
  ☆35Updated this week
• ChinaQMTECH / QM_XC7A100T_WUKONG_BOARD
  ☆34Updated last year
• fredrequin / verilator_gowin
  Re-coded Gowin GW1N primitives for Verilator use
  ☆18Updated 2 years ago
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆90Updated 4 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆41Updated 4 years ago
• openXC7 / demo-projects
  Demo projects for various Kintex FPGA boards
  ☆59Updated 2 weeks ago
• sipeed / TangNano-20K-example
  TangNano-20K-example
  ☆115Updated last year
• BrianHGinc / BrianHG-DDR3-Controller
  DDR3 Controller v1.65, 16 read/write ports, configurable widths, priority, auto-burst size & cache on each port. VGA/HDMI multiwindow vi…
  ☆78Updated last year
• Martoni / HdmiCore
  HDMI core in Chisel HDL
  ☆51Updated last year
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆77Updated last week
• ultraembedded / core_dvi_framebuffer
  Minimal DVI / HDMI Framebuffer
  ☆81Updated 4 years ago
• zerkman / zhdmi
  A complete HDMI transmitter implementation in VHDL
  ☆23Updated 4 months ago
• DECAfpga / DECA_board
  Documentation and tools related to DECA FPGA board
  ☆21Updated last year
• sipeed / TangMega-138KPro-example
  Tang Mega 138K Pro examples
  ☆70Updated last month
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆65Updated 7 months ago
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆40Updated 3 years ago
• vossstef / tang_nano_20k_c64
  Commodore C64 core for the Tang Nano 20K Primer 25K Mega 60k Mega 138K Pro Console60k FPGA
  ☆87Updated 3 weeks ago