Alternatives and similar repositories for scpi-python

Users that are interested in scpi-python are comparing it to the libraries listed below

• python-ivi / python-ivi
  A Python implementation of the Interchangeable Virtual Instrument standard.
  ☆230Updated 11 months ago
• rambo / python-scpi
  Since all the other wrappers either require VISA binary or are not generic (and do not implement the device I need)
  ☆48Updated 3 weeks ago
• DavidLutton / LabToolkit
  Python module for instrument control and automation.
  ☆25Updated 7 months ago
• Koheron / koheron-sdk
  SDK for FPGA / Linux Instruments
  ☆102Updated last week
• python-ivi / python-vxi11
  Provides a VXI-11 driver for controlling instruments over Ethernet
  ☆171Updated last year
• python-ivi / python-usbtmc
  Provides a USBTMC driver for controlling instruments over USB
  ☆168Updated last year
• analogdevicesinc / pyadi-iio
  Python interfaces for ADI hardware with IIO drivers (aka peyote)
  ☆184Updated last week
• pyvisa / pyvisa-sim
  A PyVISA backend that simulates a large part of the "Virtual Instrument Software Architecture" (VISA_)
  ☆72Updated last week
• Argonne-National-Laboratory / PyGMI
  Open source graphical interface for taking generic measurements over GPIB, USB, ethernet, serial...
  ☆36Updated 4 years ago
• analogdevicesinc / TransceiverToolbox
  MATLAB toolbox for ADI transceiver products
  ☆62Updated 3 months ago
• FMCHUB / Lib_Altium
  Altium Designer libraries for ANSI/VITA 57 FPGA Mezzanine Card (FMC) Standard
  ☆43Updated 3 years ago
• capn-freako / PyBERT
  Serial communication link bit error rate tester simulator, written in Python.
  ☆110Updated this week
• alexforencich / python-ivi
  A Python implementation of the Interchangeable Virtual Instrument standard.
  ☆56Updated 4 years ago
• jsyk / miilink
  Connecting FPGA and MCU using Ethernet RMII
  ☆23Updated 9 years ago
• OpenDGPS / zynq-axi-dma-sg
  Simple C snippet to transfer DMA memory with scatter/gather on a Zynq 7020
  ☆54Updated 8 years ago
• alex123go / RedPitaya_Acquisition
  Transform the Red Pitaya in an acquisition card
  ☆33Updated 4 years ago
• analogdevicesinc / linux_image_ADI-scripts
  ADI Scripts for Linux images
  ☆28Updated 2 weeks ago
• m-labs / jesd204b
  JESD204B core for Migen/MiSoC
  ☆36Updated 4 years ago
• coburnw / python-vxi11-server
  A VXI-11 Instrument Server written in Python
  ☆33Updated 3 months ago
• matthuszagh / pyems
  High-level python interface to OpenEMS with automatic mesh generation
  ☆88Updated 11 months ago
• casper-astro / mlib_devel
  ☆60Updated last week
• ftd2xx / ftd2xx
  Python library around FTDI D2XX. Looking for new maintainer
  ☆80Updated last year
• PyHDI / zynq-linux
  How to configure Debian Linux environment for Xilinx Zynq.
  ☆31Updated 8 years ago
• mclim9 / rssd
  Rohde & Schwarz SCPI Driver (in Python)
  ☆45Updated last year
• strath-sdr / rfsoc_sam
  RFSoC Spectrum Analyser Module on PYNQ.
  ☆82Updated last year
• EttusResearch / rfnoc-pfb-channelizer
  RFNoC out-of-tree module for a channelizer
  ☆16Updated 7 years ago
• strath-sdr / rfsoc_frequency_planner
  An RFSoC Frequency Planner developed using Python.
  ☆29Updated 2 years ago
• imrickysu / ZYNQ-Custom-Board-Bring-Up-Guide
  This is a guide for bringing up custom ZYNQ boards. It covers test sequence, test method, common error situations and code and project th…
  ☆69Updated 7 years ago
• nickdademo / cypress-fx3-sdk-linux
  Cypress FX3 SDK v1.3.1 configured to build from the firmware sources. Eclipse integration of device flashing also included.
  ☆42Updated 11 years ago
• Blebowski / CTU-CAN-FD
  This is a mirror repository for official CTU CAN FD repository:
  ☆28Updated 3 weeks ago