peternixon / MG-EV-OBD-PID
PID file for MG ZS EV suitable for use with Torque Pro
☆14Updated 3 years ago
Alternatives and similar repositories for MG-EV-OBD-PID:
Users that are interested in MG-EV-OBD-PID are comparing it to the libraries listed below
- This repository contains OBD PID Lists known to ABRP, as available by their individual licenses.☆34Updated 2 years ago
- Collection of CAN logs from different electric vehicles☆30Updated 7 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Retrieve battery diagnostic data from your smart electric drive EV.☆54Updated 2 years ago
- Reverse Engineering of the Tesla Model 3 charger and development of an open source control board☆30Updated 6 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- Firmware for OpenEnergyMonitor OpenEVSE☆18Updated 3 years ago
- Can based decoding of VW bms data☆35Updated last year
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆57Updated 7 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated last year
- Software for Damien Maguire's CHAdeMO controller☆20Updated 4 years ago
- The source code for the CAN controller for TC chargers can be found here, as well as the correct library for the MCP chip which works str…☆12Updated 5 years ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆41Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- ☆40Updated last year
- ESP32 talks via SPI with QCA7005 PLC modem☆20Updated last year
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆12Updated 10 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆28Updated 6 months ago
- ESP32 Based Chademo implementation☆14Updated 7 months ago
- SimpBMS Firmware for BMW Phev batteries 16s modules☆18Updated 11 months ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆21Updated 3 years ago
- Can Example for Arduino Core STM32☆10Updated 4 years ago
- diy BMS version 4 for Nissan Leaf cells☆20Updated 4 years ago
- ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.☆22Updated 4 years ago
- Reverse Engineering of the Tesla Gen3 charger and development of an open source control board☆14Updated 3 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- esp32 Based can-bridge with webserver☆17Updated last year