Alternatives and similar repositories for GEVCU6

Users that are interested in GEVCU6 are comparing it to the libraries listed below

• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆117Updated 3 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆78Updated 3 years ago
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆62Updated 4 years ago
• matejx / stm32f1-CAN-bootloader
  STM32F1 CAN bootloader
  ☆17Updated 5 years ago
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated 2 years ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆64Updated 9 months ago
• damienmaguire / Arduino-STM32-CAN
  Can Example for Arduino Core STM32
  ☆11Updated 5 years ago
• collin80 / GEVCU7
  7th generation GEVCU source code
  ☆26Updated 2 months ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆73Updated 6 years ago
• dimecho / Open-Inverter-WebInterface
  Open Inverter - Alternative Web Interface
  ☆34Updated 4 years ago
• jsphuebner / esp8266-web-interface
  Web interface for Huebner inverter
  ☆36Updated last year
• collin80 / due_canopen
  CANOpen library for due_can
  ☆11Updated 10 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆103Updated this week
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆90Updated 6 years ago
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆21Updated 4 years ago
• DieBieEngineering / DieBieMS-Firmware
  Firmware for the DieBieMS
  ☆59Updated 4 years ago
• uhi22 / Ioniq28Investigations
  reverse engineering of Hyundai Ioniq (classic, production 2018)
  ☆21Updated last month
• Isaac96 / CHAdeMOSoftware
  Software for Damien Maguire's CHAdeMO controller
  ☆23Updated 5 years ago
• jsphuebner / bms-hardware
  Hardware design files for Lithium BMS
  ☆14Updated 4 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆75Updated last month
• vedderb / nrf52_vesc
  BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility.
  ☆40Updated 2 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆44Updated 5 months ago
• casainho / Lebowski-controller-IC
  ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation
  ☆19Updated 5 years ago
• dvjcodec / SCG-ECU-2.0-STM32F407-8x8
  Standalone ECU designed for Speeduino and RusEFI firmware.
  ☆53Updated 2 years ago
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆27Updated 5 years ago
• SeeedDocument / USB-CAN-Analyzer
  ☆121Updated last year
• jsphuebner / stm32-sine
  Main firmware of the Huebner inverter project
  ☆181Updated last month
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆49Updated 3 years ago