Alternatives and similar repositories for xvc-esp32

Users that are interested in xvc-esp32 are comparing it to the libraries listed below

• gtortone / esp-xvcd
  ESP8266 Xilinx Virtual Cable - wifi JTAG
  ☆40Updated 4 years ago
• ultraembedded / core_ulpi_wrapper
  ULPI Link Wrapper (USB Phy Interface)
  ☆33Updated 5 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆28Updated 3 years ago
• ultraembedded / core_usb_uart
  USB serial device (CDC-ACM)
  ☆42Updated 5 years ago
• gowinsemi / GoAI
  GoAI 2.0 Public Repository
  ☆25Updated 3 years ago
• ReinForce-II / anlogic_eg4s_sdram_controller
  ☆18Updated 7 years ago
• metro94 / RV-DAP-Plus
  ☆25Updated 4 years ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆59Updated 4 years ago
• ultraembedded / core_usb_fs_phy
  USB Full Speed PHY
  ☆48Updated 5 years ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 2 years ago
• emard / flearadio
  Digital FM Radio Receiver for FPGA
  ☆63Updated 9 years ago
• ciniml / tn_serv
  SERV RISC-V sample for Tang Nano FPGA board
  ☆19Updated 5 years ago
• j-marjanovic / ocs-tray-mezzanine-adapter
  PCIe adapter for an FPGA accelerator for Open CloudServer
  ☆24Updated 5 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• abhra0897 / gowin-easy-linux
  Easy setup of GoWin FPGA SDK on Linux. A single script (main_launcher) automates all the critical steps and quickly fires up the IDE.
  ☆25Updated 5 years ago
• gtjennings1 / UPDuino-OV7670-Camera
  Design to connect Lattice Ultraplus FPGA to OV7670 Camera Module
  ☆21Updated 7 years ago
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆96Updated 5 years ago
• verilog-indeed / gowin_fpga_tutorials
  Tutorials centred around Gowin FPGA parts for the /r/GowinFPGA subreddit
  ☆59Updated last year
• regymm / SqueakyBoard
  My self-designed ZYNQ-7010 4-layer developement board.
  ☆33Updated 4 years ago
• westonb / artix7-PCIe
  artix-7 PCIe dev board
  ☆31Updated 8 years ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆36Updated last year
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 6 years ago
• piotr-go / Lichee-Tang
  Lichee Tang FPGA board examples
  ☆32Updated 6 years ago
• hansfbaier / colorlight-qmtech-adapter
  Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor
  ☆19Updated 3 years ago
• sipeed / TangNano-4K-example
  TangNano-4K-example project
  ☆110Updated 2 years ago
• kingyoPiyo / Pico-100BASE-FX
  100BASE-FX Transmitter on RP2040
  ☆24Updated last year
• controlpaths / cp_som_one
  Artix7 SOM
  ☆18Updated last year
• kholia / xvcpi
  Use Raspberry Pi as a wireless Xilinx JTAG 'cable'. Note: This is a portable, tested, maintained clone of https://github.com/strongleg/xv…
  ☆44Updated 4 years ago
• vanbwodonk / ft2232hl-jtag-clone
  Digilent JTAG clone hardware + eeprom firmware (.bin)
  ☆71Updated 3 years ago