jposada202020 / MicroPython_ICM20948Links
⛔️ DEPRECATED MicroPythonMicroPython Driver for the TDK ICM20948 Accelerometer/Gyro Sensor
☆13Updated last year
Alternatives and similar repositories for MicroPython_ICM20948
Users that are interested in MicroPython_ICM20948 are comparing it to the libraries listed below
Sorting:
- 动手学ROS2硬件控制篇MicroROS学习板例程☆12Updated 2 years ago
- Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV☆20Updated 8 months ago
- ☆19Updated 11 months ago
- Arduino library for the Benewake TFLuna LiDAR distance sensor in the I2C communication mode☆38Updated last year
- Helper library for the Hillcrest Laboratories BNO080 IMU☆40Updated 3 months ago
- An adapter for DoIt ESP32 DevKit to fit into NodeMCU's V1.0 DIP socket☆14Updated 6 years ago
- This code can use Lidar's LD06 (LDS06) provided by LDROBOT from arduino.☆21Updated 4 years ago
- Esp32 webserver robot tank control. Uses only one Jostick to control the movement. Based on TB6612FNG motor driver and smars project rob…☆15Updated 5 years ago
- Python module for the SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)☆38Updated 8 months ago
- LDROBOT LiDAR SDK(NEW)☆15Updated last year
- TOF10120 uart lib☆10Updated 6 years ago
- Migrated from 3irobotics website. Original copy of Lidar driver.☆23Updated 6 years ago
- Control Hiwonder/LewanSoul bus servos using Python 3☆14Updated 4 years ago
- An open-source Zephyr smartwatch firmware developed for Waveshare's ESP32-S3-Touch-LCD-1.28.☆17Updated 3 months ago
- Some sketches for the VL53L5CX ranging camera for use with the Arduino IDE☆22Updated 4 years ago
- ladar MB 1R2T connection stm32f103 board☆13Updated 4 years ago
- Overlay and display MLX90640 thermal camera and Pi camera outputs☆10Updated 4 years ago
- The ICM20948 is the next IMU in the lineup from Invensense, following the MPU-9250☆18Updated 5 years ago
- ydlidar arduion driver☆20Updated 11 months ago
- ☆10Updated 3 years ago
- Espressif ESP32S3 development board, ESP32S3-MINI development board is built with Espressif ESP32S3-H4R2.☆12Updated last year
- Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux☆19Updated 5 years ago
- a low cost 3d lidar based on ydlidar-x4☆11Updated 4 years ago
- Automated device to open and close curtains using ESP32 with Alexa control - Arduino Framework☆10Updated 4 years ago
- ☆74Updated 11 months ago
- ☆10Updated 7 years ago
- This code can use Lidar's LD06 (LDS06) provided by LDROBOT from python. and It displays the acquired point cloud in real time in matplotl…☆21Updated 4 years ago
- Example project using LVGL, TFT_eSPI, PlatformIO and Arduino framework on the Espressif Esp32 Box board.☆11Updated 2 years ago
- This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.☆77Updated 2 years ago
- Various 6-dof and 9-dof orientation sensors test for the purpose of Tangible Interaction Design classes.☆13Updated 2 months ago