Alternatives and similar repositories for gcc-toolchain-builder

Users that are interested in gcc-toolchain-builder are comparing it to the libraries listed below

• ultraembedded / fat_io_lib
  Small footprint, low dependency, C code implementation of a FAT16 & FAT32 driver.
  ☆73Updated 6 years ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 6 years ago
• Wren6991 / libfpga
  Reusable Verilog 2005 components for FPGA designs
  ☆49Updated 2 weeks ago
• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆44Updated 4 years ago
• nkkav / kvcordic
  Multi-function, universal, fixed-point CORDIC
  ☆15Updated 3 years ago
• Wren6991 / HyperRam
  simple hyperram controller
  ☆12Updated 6 years ago
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆29Updated 6 years ago
• zerkman / zhdmi
  A complete HDMI transmitter implementation in VHDL
  ☆21Updated 6 months ago
• lmEshoo / sp-i586
  soft processor core compatible with i586 instruction set(Intel Pentium) developped on Nexys4 board boots linux kernel with a ramdisk cont…
  ☆34Updated 9 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆66Updated 2 years ago
• ORSoC / libxsvf
  Lib(X)SVF - A library for implementing SVF and XSVF JTAG players, forked from http://svn.clifford.at/libxsvf/
  ☆24Updated 11 years ago
• ChinaQMTECH / QM_XC7A100T_WUKONG_BOARD
  ☆37Updated last year
• krabo0om / pauloBlaze
  A plain VHDL implementation of a small microprocessor fully compatible with the ISA of the well known PicoBlaze by Ken Chapman.
  ☆22Updated 4 years ago
• abnoname / iceZ0mb1e
  FPGA 8-Bit TV80 SoC for Lattice iCE40 with complete open-source toolchain flow using yosys and SDCC
  ☆58Updated 2 years ago
• zylin / zpugcc
  ☆54Updated 8 years ago
• dnotq / sdram
  Simple fixed-cycle SDRAM Controller
  ☆28Updated 6 years ago
• calint / tang-nano-9k--riscv--cache-psram
  RISC-V implementation of RV32I for FPGA board Tang Nano 9K utilizing on-board burst PSRAM, flash and SD card
  ☆44Updated 3 months ago
• lxp32 / lxp32-cpu
  A lightweight, open source and FPGA-friendly 32-bit CPU core based on an original instruction set
  ☆65Updated 7 months ago
• swetland / jtag
  simple commandline jtag stuff
  ☆34Updated 7 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• alfikpl / ao68000
  The OpenCores ao68000 IP Core is a Motorola MC68000 binary compatible processor.
  ☆79Updated 13 years ago
• RobertBaruch / plugh-1
  A CPU on an FPGA that you can play Zork on
  ☆51Updated 9 years ago
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆150Updated 9 months ago
• pablomarx / rodinia
  AGM bitstream utilities and decoded files from Supra
  ☆46Updated 4 months ago
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆88Updated 3 years ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆103Updated 2 years ago
• kevinpt / opbasm
  Open PicoBlaze Assembler
  ☆63Updated 2 years ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆93Updated 7 years ago
• Thuffir / xmodem
  XMODEM with binary mode and 1K option and a sample YMODEM implementation.
  ☆36Updated 6 years ago
• mithro / ixo-usb-jtag
  usb-jtag - Altera USB Blaster Emulation with a FX2
  ☆72Updated 2 months ago