Alternatives and similar repositories for rlc_chart

Users that are interested in rlc_chart are comparing it to the libraries listed below

• capn-freako / PyBERT
  Serial communication link bit error rate tester simulator, written in Python.
  ☆111Updated last week
• gmagno / spyci
  A tiny Python package to parse spice raw data files.
  ☆53Updated 2 years ago
• dreoilin / pygmid
  A python3 gm/ID starter kit
  ☆51Updated 11 months ago
• ggventurini / python-deltasigma
  A port of the MATLAB Delta Sigma Toolbox based on free software and very little sleep
  ☆95Updated 3 years ago
• eskiyerli / revedaRelease
  This repository is for (pre-)release versions of the Revolution EDA.
  ☆42Updated 2 weeks ago
• wulffern / aicex
  Files for Advanced Integrated Circuits
  ☆29Updated 2 months ago
• KenKundert / flicker-noise
  How to correctly write a flicker-noise model for RF simulation.
  ☆22Updated 2 years ago
• capn-freako / PyAMI
  Python package for IBIS-AMI model development and testing
  ☆29Updated 2 weeks ago
• yrrapt / amsat_txrx_ic
  An Amateur Radio Transceiver IC (2.4 / 5 / 10 GHz)
  ☆71Updated 3 years ago
• bmurmann / Ngspice-on-Colab
  Sandbox for experimenting with Ngspice and open PDKs in Google Colab
  ☆24Updated last year
• dwarning / VA-Models
  Verilog-A simulation models
  ☆78Updated last week
• yrrapt / caravel_amsat_txrx_ic
  ☆29Updated 4 years ago
• wulffern / tt06-sar
  SAR ADC on tiny tapeout
  ☆42Updated 6 months ago
• TinyTapeout / xschem-viewer
  Online viewer of Xschem schematic files
  ☆26Updated 7 months ago
• stineje / sky130RHBDlib
  Open-source RHBD (Radiation Hardened by Design) Standard-Cell Library for SKY130
  ☆8Updated 2 months ago
• efabless / cace
  Circuit Automatic Characterization Engine
  ☆50Updated 6 months ago
• LeoGalloGomes / openems_on_sky130
  EM simulation scripts to simulate passive devices on Skywater 130nm open-source process. (Octave interface only for now)
  ☆12Updated last year
• westonb / open-pmic
  A current mode buck converter on the SKY130 PDK
  ☆27Updated 4 years ago
• ashwith / pyMOSChar
  Python port of Prof. Boris Murmann's gm/ID Starter Kit
  ☆54Updated 8 years ago
• tclarke / sky130radio
  components and examples for creating radio ICs using the open skywater 130nm PDK
  ☆19Updated 4 years ago
• ignamv / ngspyce
  Python bindings for ngspice simulation engine
  ☆69Updated 5 years ago
• esynr3z / adc-eval
  📊 Tools collection (NumPy + Matplotlib based) to do spectral analysis and calculate the key performance parameters of an ADC
  ☆21Updated 2 years ago
• ACMmodel / MOSFET_model
  A simple MOSFET model with only 5-DC-parameters for circuit simulation
  ☆45Updated 3 weeks ago
• mbalestrini / gdsiistl
  Converts GDSII files to STL files.
  ☆37Updated last year
• KenKundert / psf_utils
  Read Spectre PSF files
  ☆65Updated last week
• Open-RFlab / octave-openems-hll
  openEMS High-level layer
  ☆19Updated 5 months ago
• ChrisZonghaoLi / gm_id_gf180mcu
  This repo contains introduction of gm/id method and its application to some OTA design examples.
  ☆18Updated last year
• yrrapt / analogue_design_example
  An example of analogue design using open source IC design tools
  ☆29Updated 4 years ago
• Nubis-Communications / SignalIntegrity
  Python tools for signal integrity applications
  ☆152Updated this week
• cdsdm / cdsdm
  Cadence Virtuoso Design Management System
  ☆36Updated 2 years ago