Alternatives and similar repositories for litehm2

Users that are interested in litehm2 are comparing it to the libraries listed below

• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆73Updated last month
• multigcs / riocore
  riocore
  ☆62Updated this week
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆80Updated last year
• machinekit / mksocfpga
  Hostmot2 FPGA code for SoC/FPGA platforms from Altera and Xilinx
  ☆32Updated 2 years ago
• Peter-van-Tol / LITEXCNC-HUB75HAT
  A PCB that turns the Colorlight 5A-75B into an easy to use LinuxCNC motion controller
  ☆14Updated last year
• freakontrol / stmbl
  ☆35Updated 3 months ago
• sleepybishop / mojo_hostmot2
  hostmot2 firmware for the embedded micro mojo v3 fpga
  ☆11Updated 5 years ago
• MakeMagazinDE / Solder-Paste-Dispenser
  Umbau einer Mini-CNC-Fräse zu einem Lötpasten-Dispenser für SMD-Bestückung
  ☆12Updated 3 years ago
• Laksen / kicad-bga-tools
  Tools to make life easier for PCB design with BGA's
  ☆48Updated 5 years ago
• littleboot / ACRE
  Absolute Capacitive Rotary Encoder (ACRE)
  ☆36Updated 3 years ago
• hstarmans / hexastorm
  Amaranth HDL framework for laser scanner with motion control
  ☆30Updated last week
• mhouse1 / mechsoftronic
  FPGA based CNC Machine
  ☆94Updated 6 years ago
• perehinik / Logic_Analyzer_PCB
  KiCad PCB project of Logic Analyzer
  ☆42Updated 4 years ago
• marcoreps / linuxcnc_leadshine_EL8
  LinuxCNC configuration with EtherCAT Servo Drives Leadshine EL8 and some Beckhoff IO Modules
  ☆40Updated last year
• pcm52 / DRO-V6
  Digital Readout sketch files for the Arduino IDE
  ☆11Updated 5 years ago
• linuxcnc-ethercat / linuxcnc-ethercat
  LinuxCNC EtherCAT HAL driver
  ☆63Updated last month
• rriggs / kintex-7-stlv7325t-board-files
  ☆21Updated 2 years ago
• OVGN / OpenIRV
  Open-source thermal camera project
  ☆59Updated 3 years ago
• crteensy / FETProbe_tiny
  A tiny 1.3 GHz FET Probe
  ☆33Updated 3 years ago
• richardklingler / openpnp
  My pick and place machine controlled by the great OpenPNP software.
  ☆77Updated 4 years ago
• MisterHW / EVAL-MP8862
  A self-contained MP8862 1..20.5V/2A buck-boost DCDC module for breadboard, evaluation and deployment
  ☆14Updated 3 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated last year
• BoltzRnD / SmartPrintCoreH7x
  STM32H7 based Robust and Open Source 3D Printer Mainboard
  ☆70Updated last month
• photonfirmware / photon
  Open-Source firmware for pick and place feeders
  ☆67Updated this week
• hobbymachinist / els
  Electronic Leadscrew For Lathe
  ☆63Updated 2 years ago
• antmicro / m2-pcie-adapter
  Adapter card exposing M.2 (key-M) signals on PCIe x4 card edge socket.
  ☆42Updated last year
• sequoia-hope / open_linear_motor
  Design files for a brushless linear motor project I worked on mostly from 2010-2012
  ☆28Updated 4 years ago
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆48Updated 7 years ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆88Updated 4 years ago
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆164Updated 3 months ago