Alternatives and similar repositories for Remora:

Users that are interested in Remora are comparing it to the libraries listed below

• Expatria-Technologies / Flexi-HAL
  Expatria Technologies GRBLHAL and LinuxCNC (and more!) CNC control board.
  ☆84Updated last month
• AlexmagToast / LinuxCNC_ArduinoConnector
  This Projekt enables you to connect an Arduino to LinuxCNC and provides as many IO's as you could ever wish for. This Software is used as…
  ☆70Updated this week
• kcjengr / probe_basic
  User interface for the LinuxCNC machine control.
  ☆97Updated this week
• Stutchbury / Manualmatic-Pendant
  The Manualmatic Pendant for LinuxCNC
  ☆43Updated 2 months ago
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆231Updated last year
• Rack-Robotics / Powercore-V2.0
  Open-Source wire EDM power supply by Rack Robotics, Inc.
  ☆142Updated 5 months ago
• grblHAL / drivers
  Driver overview
  ☆32Updated 2 weeks ago
• Rack-Robotics / Powercore-V1.0-Hardware
  CAD & Electronics for Powercore V1
  ☆149Updated last year
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆234Updated last week
• terjeio / GRBL_MPG_DRO_BoosterPack
  Tiva C BoosterPack for GRBL MPG/DRO
  ☆46Updated last year
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆52Updated this week
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆111Updated last year
• kachurovskiy / nanoels
  Electronic Lead Screw for metal lathe
  ☆195Updated 2 weeks ago
• verser-git / probe_screen_v2
  ☆43Updated 4 years ago
• TooTall18T / tool_length_probe
  Tool length probe subroutine for Probe Basic.
  ☆17Updated this week
• hobbymachinist / els
  Electronic Leadscrew For Lathe
  ☆59Updated last year
• bigtreetech / BIGTREETECH-S42B-V1.0
  The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be…
  ☆113Updated 3 years ago
• scottalford75 / Remora-RT1052-cpp
  Remora firmware for RT1052 based CNC controllers. C++ version
  ☆14Updated 7 months ago
• DerAndere1 / Marlin
  Optimized firmware for RepRap 3D printers based on the Arduino platform. The branch Marlin2ForPipetBot is optimized firmware for cartesia…
  ☆54Updated last week
• IvDm / Z-probe-on-smd-resistors-2512
  Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.
  ☆135Updated 4 years ago
• zapta / simple_stepper_motor_analyzer
  A DYI stepper motor analyzer. This is a new design that is based on Raspberry Pi Pico and users a compact single PCB design. NOTE: The l…
  ☆149Updated last year
• grblHAL / Controllers
  List of controllers supported by grblHAL
  ☆41Updated last week
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆74Updated 6 months ago
• G-EDM / G-EDM-v1-deprecated
  The G-EDM is a 4in1 electrical discharge machine that supports sinker EDM, EDM engraving, EDM drilling and Wire EDM operations. In the fu…
  ☆49Updated 6 months ago
• bhowiebkr / laser-level-webcam
  A tool for measuring height in microns of arbitrary sized objects using a webcam and a laser level.
  ☆154Updated 10 months ago
• GuiHue / probe_screen_v2
  ☆10Updated 5 years ago
• TkkrLab / LinearMotor
  Diy Linear Motor
  ☆103Updated 3 years ago
• scottalford75 / Remora-NVEM
  Remora firmware for Novusun NVEM controller board
  ☆14Updated 3 months ago
• linuxcnc-probe-screen / probe-screen-ng
  LinuxCNC Probe Screen
  ☆25Updated last year
• zapta / legacy_stepper_motor_analyzer
  A DYI minimalist hardware stepper motor analyzer with graphical touch screen.
  ☆161Updated last year