Alternatives and similar repositories for EddieBalance

Users that are interested in EddieBalance are comparing it to the libraries listed below

• fastbot3d / firmware
  ☆11Updated 9 years ago
• uArm-Developer / UF_uArm
  uArm Arduino Control Library
  ☆52Updated 6 years ago
• sfgit / ESP8266-01-BREAKOUT
  ESP8266-01 Breakout Board
  ☆34Updated 10 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆112Updated 4 years ago
• jochenalt / Paul
  Paul, a depressed robot balancing on his ball
  ☆42Updated 8 years ago
• Xevel / NXV11
  Hacking of the Neato XV-11 lidar
  ☆84Updated 5 years ago
• bq / printbots
  ☆29Updated 6 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆57Updated 5 years ago
• yorkhackspace / meArm
  Inverse kinematics control library for Phenoptix meArm
  ☆119Updated 4 years ago
• francisengelmann / FabScan100
  FabScan1.5
  ☆108Updated 8 years ago
• OttoHermansson / GcodeSender
  A simple program för transfering gcode to Grbl. I started this to have a easy control program for my pocket laser engraver (http://www.in…
  ☆70Updated 14 years ago
• davidsanfal / miniloki
  Omnidirectional robotic platform
  ☆26Updated 9 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆64Updated 8 years ago
• TKJElectronics / BalancingRobotArduino
  This is the Arduino version of the code for my balancing robot/segway
  ☆77Updated 12 years ago
• TKJElectronics / Balanduino
  Git repository for the Balanduino balancing robot
  ☆134Updated 3 years ago
• synthetos / grblShield
  ☆135Updated 11 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆88Updated 10 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆98Updated 10 years ago
• EmmanuelG / Mondrian
  The Modular RepRap !
  ☆28Updated 9 years ago
• bq / Cyclone-PCB-Factory
  Cyclone (Circuit Cloner) is a CNC mill intended for PCB manufacturing.
  ☆24Updated 9 years ago
• Neuromancer2701 / BLDC_ros_controller
  ☆46Updated 7 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 8 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆150Updated 11 years ago
• inventables / grbl
  Inventables X-Carve specific Grbl versions:
  ☆44Updated 6 years ago
• Waterfox / razbot
  A 3D printed raspberry pi ROS robot
  ☆24Updated 9 years ago
• Counterfeiter / Q-LearningRobot
  This is a four-legged robot that learns to walk with Q-Learning and an ANN.
  ☆49Updated 8 years ago
• LibreScanner / horus-fw
  Horus firmware for 3D Scanner Ciclop
  ☆70Updated 9 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 8 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆159Updated 8 years ago
• uArm-Developer / UArmForArduino
  Arduino uArm Metal Library (uArm Metal only)
  ☆82Updated 6 years ago