kentdev / AX12-Control-STM32F4Links
Code to control multiple Dynamixel AX-12 servo motors over USART on an STM32F4 chip
☆10Updated 10 years ago
Alternatives and similar repositories for AX12-Control-STM32F4
Users that are interested in AX12-Control-STM32F4 are comparing it to the libraries listed below
Sorting:
- A project to automatically control a Stewart Platform using an IMU sensor, an Arduino and a library in C++ to perform all the Stewart con…☆51Updated 5 years ago
- Robotic quadruped☆45Updated 7 years ago
- ☆198Updated 6 years ago
- UP board / rasperry pi to quad CAN Bus☆116Updated 5 years ago
- A ROS node that describes a quadruped robot using URDF☆84Updated 7 years ago
- ROS moveit config files for the AR2 robot☆17Updated 7 years ago
- Solidworks files for quadruped project☆25Updated 5 years ago
- The turtlebot_arm package provides bringup, description, and utilities for using the TurtleBot arm.☆52Updated 4 years ago
- MOCO通用四足机器人控制器教程☆119Updated 5 years ago
- 四足机器人 固件集合☆51Updated 5 years ago
- Quadruped using servos and computer vision for navigation☆59Updated 6 years ago
- ROS packages for Metal☆99Updated 8 years ago
- High performance motor control☆77Updated 6 years ago
- Simulating a Stewart platform in Gazebo using a plugin to allow control of a closed loop manipulator with ROS.☆121Updated 6 years ago
- Math model for a fixed-rotary Gough-Stewart platform to allow the use of hobby servos to adjust the lengths of six parallel legs to achie…☆15Updated 8 years ago
- Arduino library to control Dynamixel servos (MX series) over serial.☆19Updated 10 years ago
- ROS packages for swiftpro and swift☆55Updated 4 years ago
- Matlab GUI to calculate and visualize the inverse kinematics of a rotary stewart platform.☆98Updated 9 years ago
- robot actuator☆32Updated 7 years ago
- ROS driver for the ODrive motor drive☆75Updated 4 years ago
- Building self-balancing robot using LQR controller☆22Updated last year
- Manipulator robot based on BCN3DMOVEO with 6 degree of freedom (DOF) and user interface (GUI)☆57Updated 4 years ago
- ☆35Updated 6 years ago
- Niryo One ROS stack☆251Updated 3 years ago
- Torque Control for the KUKA youBot Arm☆50Updated 10 years ago
- BOM, Circuit and PCB Gerber of OpenCR☆122Updated 5 years ago
- ROBOTIS Dynamixel SDK (Protocol1.0/2.0)☆559Updated last week
- Arduino Kinematics library for differential drive(2WD, 4WD) and mecanum drive robots.☆71Updated 6 years ago
- ☆160Updated last year
- This ros metapackage builds the simple framework for the second generation of xmbot's manipulator, which includes the underlying driver,…☆34Updated 2 years ago