playersz28 / JBD-ESP32Links
ESP32 interface for JBD BMS
☆12Updated 3 years ago
Alternatives and similar repositories for JBD-ESP32
Users that are interested in JBD-ESP32 are comparing it to the libraries listed below
Sorting:
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆197Updated 3 weeks ago
- Read and Write Library for Overkill Solar BMSs☆19Updated 3 years ago
- ESPHome component to monitor and control a ANT-BMS via UART☆64Updated 3 weeks ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆117Updated last year
- ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).☆33Updated 2 years ago
- Small ESP8266 (Wemos D1 Mini) project to control a 4 wire PWM Fan.☆15Updated 5 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆97Updated 8 months ago
- ☆63Updated 6 years ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆20Updated last month
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE☆107Updated 3 weeks ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆95Updated 3 weeks ago
- JK BMS to PYLON CANBUS Protocol converter☆40Updated 3 years ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆176Updated 4 months ago
- ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus☆16Updated 3 weeks ago
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆69Updated 3 weeks ago
- ESP32 OpenTherm Wi-Fi Thermostat☆61Updated last year
- Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display☆21Updated 5 years ago
- Yet another multi-BMS Merging Solution☆164Updated this week
- GC97 meter via ESP8266☆10Updated 4 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆195Updated last year
- ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…☆57Updated 9 months ago
- Firmware for OpenEnergyMonitor OpenEVSE☆18Updated 3 years ago
- ☆19Updated 3 years ago
- Library for working with JBD BMS☆76Updated last year
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆31Updated 3 years ago
- ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower☆274Updated 6 months ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆36Updated 10 months ago
- A simple simulation of the Daly Smart BMS for ESP32 via bluetooth BLE☆16Updated last year
- ☆66Updated 3 years ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆57Updated 2 months ago