Adminius / ESP32-ScanMyTeslaLinks
CAN to BlueTooth Adapter for ScanMyTesla on ESP32
☆59Updated last year
Alternatives and similar repositories for ESP32-ScanMyTesla
Users that are interested in ESP32-ScanMyTesla are comparing it to the libraries listed below
Sorting:
- Firmware and Documentation for the CANserver☆106Updated 2 years ago
- EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.☆158Updated 4 months ago
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆65Updated last year
- ☆16Updated 4 years ago
- Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32☆13Updated 3 months ago
- esp32 Based can-bridge with webserver☆19Updated last year
- DBC file for Tesla Model 3 CAN messages☆352Updated 2 years ago
- LEAF CAN bus message decoding with proper database files☆209Updated 7 months ago
- ESP32 BLE Tire Pressure Management System☆113Updated 5 years ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆117Updated last year
- ☆533Updated last week
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆35Updated 10 months ago
- Reverse Engineering of the Tesla Model 3 charger and development of an open source control board☆36Updated last year
- A Tesla CAN bus utility for Raspberry Pi (WIP)☆37Updated 2 years ago
- ☆145Updated 2 months ago
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆76Updated 10 months ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆195Updated last week
- ☆26Updated 4 months ago
- DBC file for Tesla Model 3 used by the Onyx M2 projects☆29Updated last year
- SimpBMS Documentation☆90Updated 3 years ago
- Brings EVSE WB/DIN into your WiFi☆81Updated 2 years ago
- PCB with ESP32 and CAN bus. For controlling CAN-devices like heatpumps via ESPHome☆33Updated 2 years ago
- Control power delivered by a Tesla Wall Charger using two wires screwed into its RS-485 terminals.☆193Updated 2 years ago
- Setting up Torque Pro to show OBD data on Hyundai / Kia Electric Vehicles☆258Updated 4 years ago
- A library for controlling Midea home appliances using the UART protocol.☆91Updated 3 weeks ago
- My Blog☆132Updated 6 years ago
- CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)☆338Updated 11 months ago
- Add Home Assistant support to your RDTech power supply☆50Updated 8 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆194Updated last year
- Firmware for canbus boxes☆111Updated 4 months ago