thezim / DBCToolsLinks
☆22Updated 6 years ago
Alternatives and similar repositories for DBCTools
Users that are interested in DBCTools are comparing it to the libraries listed below
Sorting:
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 9 months ago
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- ☆177Updated 7 years ago
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- 7th generation GEVCU source code☆26Updated 2 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 6 months ago
- ISO 15765-2 TP implementation for Arduino☆89Updated 7 months ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆204Updated last week
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆14Updated 2 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆129Updated 4 years ago
- Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver☆119Updated 6 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Collection of CAN logs from different electric vehicles☆39Updated this week
- ☆18Updated 4 years ago
- CAN bus analyzing and simulation GUI tool for Windows.☆79Updated 3 months ago
- Volvo LIN bus reader☆100Updated 5 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆138Updated 4 years ago
- Originally a development tool for Scan My Tesla, but contributions has turned into a standalone canbus data analyzer suite, supporting a …☆242Updated last year
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- Reverse engineering of the Tesla Model 3 battery bms control☆67Updated 3 months ago
- Logging CAN, KLINE and ISO15765, TP2.0 directly into Wireshark and parsing UDS and KWP2000 data☆30Updated 2 years ago
- reverse engineering of Hyundai Ioniq (classic, production 2018)☆21Updated last month
- STM32F1 CAN bootloader☆17Updated 5 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆73Updated 6 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆93Updated 7 months ago
- The LIN protocol implemented over Arduino APIs (Serial and Digital IO)☆130Updated 4 years ago
- Web interface for Huebner inverter☆36Updated last year
- Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.☆48Updated last month