antmicro / jetson-orin-baseboardLinks
Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX
☆181Updated 2 months ago
Alternatives and similar repositories for jetson-orin-baseboard
Users that are interested in jetson-orin-baseboard are comparing it to the libraries listed below
Sorting:
- An open source Jetson Nano baseboard and tools to design your own.☆83Updated 4 years ago
- Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX☆504Updated last year
- 32x IMU array sensor board based on ICM-42688-P and ICE40UP5K☆295Updated last year
- Camera board with a pair of OmniVision OV9281 sensors☆65Updated last year
- GMSL2 deserializer with MIPI CSI-2 output☆24Updated 7 months ago
- Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX☆109Updated last week
- Sensor API for controlling the BMI08x range of IMUs from Bosch Sensortec. To report issues, go to https://community.bosch-sensortec.com/t…☆140Updated last year
- C library for managing and reading xsens MTi IMU modules over serial.☆55Updated last year
- Sample applications for FreeRTOS + micro-ROS☆92Updated 2 months ago
- Altium Designs for DepthAI Carrier Boards☆491Updated last month
- ☆135Updated 9 months ago
- FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.☆50Updated 5 years ago
- ☆258Updated last year
- C library to manage the GPIO header of the Nvidia Jetson boards☆105Updated 5 months ago
- A compact Extended Kalman Filter (EKF) library for real time embedded system (with template for Teensy4/Arduino and STM32CubeIDE)☆129Updated 5 years ago
- MPSoC architecture for accelerating drone components and interfacing with ROS2.☆19Updated 6 months ago
- Antmicro's open hardware HDMI into MIPI CSI-2 converter☆101Updated last year
- A quaternion based sensor fusion algorithm that fuses accelerometers and gyroscopes and optionally magnetometers☆190Updated last year
- Raspberry Pi Pico (RP2040) and micro-ROS integration☆217Updated this week
- A GUI based in PyQT5 and PyQtGraph to manage and configure SimpleFOC devices.☆32Updated 3 years ago
- Compact brushless motor controller with FOC, integrated absolute encoder and CAN Bus.☆275Updated 11 months ago
- Intel® RealSense™ camera driver for GMSL* interface☆38Updated this week
- The Kria Robotics Stack (KRS) is a ROS 2 superset for industry, an integrated set of robot libraries and utilities to accelerate the deve…☆57Updated 11 months ago
- A set of utilities for integrating micro-ROS in a STM32CubeMX project☆226Updated 2 months ago
- Zephyr RTOS based Vehicle Management Unit☆30Updated last week
- Example PTPD slave and master projects for NUCLEO-F429ZI development boards.☆92Updated 4 years ago
- Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM☆79Updated 2 years ago
- Arduino library for communicating with the InvenSense ICM42688 nine-axis IMUs.☆100Updated last year
- A demo project of how to use Eigen in STM32☆40Updated 5 years ago
- Teensy3.6 based flight control firmware☆25Updated 6 years ago