Alternatives and similar repositories for artix-dc-scm

Users that are interested in artix-dc-scm are comparing it to the libraries listed below

• kholia / xvcpi
  Use Raspberry Pi as a wireless Xilinx JTAG 'cable'. Note: This is a portable, tested, maintained clone of https://github.com/strongleg/xv…
  ☆44Updated 4 years ago
• j-marjanovic / ocs-tray-mezzanine-adapter
  PCIe adapter for an FPGA accelerator for Open CloudServer
  ☆24Updated 5 years ago
• quartiq / bscan_spi_bitstreams
  FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.
  ☆57Updated 2 years ago
• PCB-Arts / zynq-feather
  Zynq-Feather brings the power of a Xilinx Zynq SoC (ARM + FPGA) into the compact Adafruit Feather form factor — enabling modular, high-pe…
  ☆49Updated 4 years ago
• BerkeleyLab / XVC-FTDI-JTAG
  Xilinx virtual cable server for generic FTDI 4232H.
  ☆59Updated last year
• enjoy-digital / litex-acorn-baseboard
  LiteX development baseboards arround the SQRL Acorn.
  ☆72Updated 9 months ago
• ultraembedded / core_usb_fs_phy
  USB Full Speed PHY
  ☆48Updated 5 years ago
• ultraembedded / core_ulpi_wrapper
  ULPI Link Wrapper (USB Phy Interface)
  ☆33Updated 5 years ago
• ultraembedded / core_usb_uart
  USB serial device (CDC-ACM)
  ☆42Updated 5 years ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 2 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆85Updated last year
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆28Updated 3 years ago
• ultraembedded / core_usb_cdc
  Basic USB-CDC device core (Verilog)
  ☆82Updated 4 years ago
• enjoy-digital / litejesd204b
  Small footprint and configurable JESD204B core
  ☆49Updated 2 months ago
• vanbwodonk / ft2232hl-jtag-clone
  Digilent JTAG clone hardware + eeprom firmware (.bin)
  ☆71Updated 3 years ago
• gabriel-tenma-white / sdr5
  Design files for sdr5 prototype (Zynq + AD9363)
  ☆107Updated 6 years ago
• imrickysu / ZYNQ-Custom-Board-Bring-Up-Guide
  This is a guide for bringing up custom ZYNQ boards. It covers test sequence, test method, common error situations and code and project th…
  ☆71Updated 8 years ago
• emard / flearadio
  Digital FM Radio Receiver for FPGA
  ☆63Updated 9 years ago
• iDoka / awesome-fpga-boards
  Second life for FPGA boards which can be repurposed to DYI/Hobby projects ..............................................................…
  ☆98Updated 4 years ago
• enjoy-digital / daisho
  Test of the USB3 IP Core from Daisho on a Xilinx device
  ☆100Updated 6 years ago
• tmbinc / xvcd
  Xilinx Virtual Cable Daemon
  ☆125Updated 9 months ago
• antmicro / lpddr4-test-board
  Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM
  ☆39Updated last week
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆89Updated 4 years ago
• antmicro / kintex-410t-devboard
  ☆38Updated last week
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆65Updated last year
• tgingold / OpenTDC
  Time to Digital Converter (TDC)
  ☆36Updated 4 years ago
• bggardner / can-lite-vhdl
  A lightweight Controller Area Network (CAN) controller in VHDL
  ☆30Updated last year
• litex-hub / litespi
  Small footprint and configurable SPI core
  ☆46Updated last week
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆91Updated 5 months ago