Alternatives and similar repositories for hdmi-mipi-bridge

Users that are interested in hdmi-mipi-bridge are comparing it to the libraries listed below

• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆113Updated 2 months ago
• will127534 / imx294-v4l2-driver
  ☆52Updated last month
• antmicro / snapdragon-845-baseboard
  https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
  ☆59Updated last year
• kingyoPiyo / RasPico_SHIBAKI_Board
  SFP module test board for Raspberry Pi Pico
  ☆62Updated last year
• InES-HPMM / Lontium_lt6911uxc
  Driver for HDMI to CSI converter lt6911uxc
  ☆60Updated 6 months ago
• AvaotaSBC / Avaota-A1
  Avaota A1 is a Powerful Open Sourcce SBC with Allwinner T527 Octa-Core A55 SoC
  ☆111Updated last year
• probe-scope / Probe-Scope-PCB
  Main Probe Scope PCB Repo
  ☆57Updated 6 years ago
• circuitvalley / mipi_dsi_bridge_fpga
  Source code of MIPI DSI Bridge Published on https://www.circuitvalley.com
  ☆109Updated last year
• YuzukiHD / ProjectYosemite
  Small Heterogeneous & AI Powered Computing SBC Based on V853
  ☆20Updated 2 years ago
• harlab / CM4_LCD_LT070ME05000
  Raspberry Pi CM4 bindings for JDI LT070ME05000 1200x1920 IPS display
  ☆80Updated 4 years ago
• radxa / radxa-cm-projects
  ☆60Updated last month
• zengcym / HDMI-To-MIPI
  Open Source Hardware HDMI into MIPI DSI-2 converter, Source code for HDMI-To-MIPI, use TC358870XBG and STM32F103C8T6. …
  ☆102Updated last year
• wuxx / icesugar-nano
  iCESugar-nano FPGA board (base on iCE40LP1K)
  ☆133Updated last month
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆60Updated 2 years ago
• antmicro / gmsl-deserializer
  GMSL2 deserializer with MIPI CSI-2 output
  ☆22Updated 7 months ago
• OneKiwiTech / kicad-fanout-tool
  ☆34Updated 5 months ago
• antmicro / sdi-mipi-bridge-hw
  Antmicro's open hardware 3G SDI into MIPI CSI-2 converter
  ☆60Updated last year
• realteck-ky / kicad-m2ngff
  KiCad Library for m.2 NGFF card
  ☆27Updated 6 years ago
• tdjastrzebski / ICN6211-Configurator
  ICN6211 Configurator
  ☆40Updated 5 years ago
• SdtElectronics / Xassette-Asterisk
  Evaluation board for AllWinner's RISC-V 64 SoC F133/D1s
  ☆216Updated 3 years ago
• surgical-robots / cycx3_uvc_ov5640
  Firmware to drive Cypress CX3 camera controller
  ☆25Updated 8 years ago
• CNflysky / TC358870
  Hardware & Software for the Toshiba TC358870XBG HDMI to MIPI-DSI bridge chip.
  ☆56Updated 8 months ago
• openwch / usb-jtag-spi
  Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x
  ☆115Updated 2 years ago
• dukelec / cdpga
  FPGA core boards / evaluation boards based on CDCTL hardware
  ☆93Updated 4 years ago
• Scottapotamas / spe-marine-node
  Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L …
  ☆27Updated 2 years ago
• YuzukiHD / YuzukiRulerPro
  YuzukiRulerPro based on Allwinner D1-H RISC-V Processor
  ☆30Updated 3 years ago
• groupgets / kimchi-micro
  An open hardware embedded SBC for the NXP i.MX8M Mini application processor
  ☆125Updated 2 weeks ago
• jmgao / kicad-ngff
  NGFF (M.2) edge connector footprints and symbols for KiCAD
  ☆40Updated 5 years ago
• PCB-Arts / zynq-feather
  Zynq-Feather brings the power of a Xilinx Zynq SoC (ARM + FPGA) into the compact Adafruit Feather form factor — enabling modular, high-pe…
  ☆48Updated 4 years ago
• diodep / ch55x_jtag
  CH55x USB to JTAG bridge
  ☆138Updated 7 months ago