antmicro / jetson-nano-baseboardLinks
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
☆502Updated last year
Alternatives and similar repositories for jetson-nano-baseboard
Users that are interested in jetson-nano-baseboard are comparing it to the libraries listed below
Sorting:
- Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX☆183Updated 3 months ago
- ☆261Updated last year
- An open source Jetson Nano baseboard and tools to design your own.☆84Updated 4 years ago
- Altium Designs for DepthAI Carrier Boards☆494Updated 2 months ago
- Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems.☆114Updated 4 months ago
- NVIDIA Jetson IMX477 HQ RPI V3 camera driver☆134Updated 2 years ago
- Vision Components MIPI CSI-2 driver for NVIDIA Jetson Nano, Xavier NX, AGX Xavier, TX2 and Orin Nano, Orin NX☆109Updated last week
- Camera board with a pair of OmniVision OV9281 sensors☆65Updated last year
- FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.☆50Updated 5 years ago
- Sony IMX219 Raspberry Pi V2 CMOS Datasheet and Source Code☆165Updated 9 years ago
- This is the repository for ArduCAM USB Camera Shield☆134Updated 2 years ago
- Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit☆97Updated last year
- MIPI CSI-2 Camera Sensor Receiver verilog HDL implementation For any generic FPGA. Tested with IMX219 on Lattice MachXO3LF. 2Gbps UVC Vid…☆442Updated 3 years ago
- Reverse engineered annotated registers from Sony imx708 camera sensor☆54Updated 2 years ago
- Example app directly receiving raw data from CSI2 sensors☆270Updated last year
- Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM☆80Updated 2 years ago
- Simple Python / C++ interface to CSI camera connected to NVIDIA Jetson.☆93Updated 6 years ago
- Reference/demonstration distro for meta-tegra☆103Updated last week
- Analog Devices 3D ToF software suite☆72Updated last year
- Open Source 4k CSI-2 Rx core for Xilinx FPGAs☆404Updated 7 years ago
- Shell scripts to setup a NVIDIA Jetson AGX Xavier, Xavier NX, AGX Orin, or Orin Nano Developer Kit to boot from external storage.☆174Updated last year
- Sensor API for controlling the BMI08x range of IMUs from Bosch Sensortec. To report issues, go to https://community.bosch-sensortec.com/t…☆140Updated last year
- 32x IMU array sensor board based on ICM-42688-P and ICE40UP5K☆299Updated last year
- GMSL2 deserializer with MIPI CSI-2 output☆24Updated 8 months ago
- A C++ library that enables the use of Jetson's GPIOs☆302Updated last year
- FDP Link III driver for ds90ub954/ds90ub953☆53Updated last year
- VEYE and CS series camera module bsp to NVIDIA Jetson platform☆52Updated 2 months ago
- Antmicro's open hardware HDMI into MIPI CSI-2 converter☆102Updated last year
- Raspberry Pi Compute Module 4 (CM4) Full Library, Design Template&Guideline for Altium Designer☆195Updated last year
- SDK for Greenwaves Technologies' GAP8 IoT Application Processor☆149Updated last year