Alternatives and similar repositories for gowin-easy-linux

Users that are interested in gowin-easy-linux are comparing it to the libraries listed below

• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆58Updated 4 years ago
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆104Updated 3 months ago
• riktw / tang4Kramblings
  ☆21Updated 4 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆69Updated last year
• mmicko / prjtang
  Documenting the Anlogic FPGA bit-stream format.
  ☆88Updated 2 years ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆89Updated 4 years ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆102Updated 2 years ago
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆41Updated 4 years ago
• mithro / ixo-usb-jtag
  usb-jtag - Altera USB Blaster Emulation with a FX2
  ☆72Updated last month
• icebreaker-fpga / icebreaker-pmod
  Collection of PMOD boards for the use with iCEBreaker and any other FPGA board that has PMOD connectors.
  ☆91Updated last year
• folknology / IceCore
  IceCore Ice40 HX based modular core
  ☆45Updated 4 years ago
• StereoNinja / StereoNinjaFPGA
  Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board
  ☆32Updated 2 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• Disasm / hc245t-bypass
  ☆25Updated 5 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆63Updated 2 years ago
• kholia / xvcpi
  Use Raspberry Pi as a wireless Xilinx JTAG 'cable'. Note: This is a portable, tested, maintained clone of https://github.com/strongleg/xv…
  ☆44Updated 4 years ago
• emard / esp32ecp5
  micropython ESP32 programmer/flasher for ECP5 JTAG
  ☆74Updated 2 months ago
• kprasadvnsi / Anlogic_Doc_English
  Translation of Anlogic's FPGA datasheet, manual etc. to English.
  ☆56Updated 6 years ago
• zf3 / psram-tang-nano-9k
  An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA
  ☆84Updated 3 years ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆81Updated 5 months ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆92Updated 5 months ago
• brouhaha / xchange
  Change part number or package in a Xilinx 7-series FPGA bitstream
  ☆41Updated 5 years ago
• kholia / Colorlight-5A-75B
  Notes for Colorlight-5A-75B.
  ☆50Updated last year
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆23Updated 3 years ago
• hansfbaier / colorlight-qmtech-adapter
  Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor
  ☆19Updated 3 years ago
• pergola-fpga / pergola
  Low-cost ECP5 FPGA development board
  ☆80Updated 5 years ago
• blackmesalabs / sump2
  open-source logic analyzer for FPGAs
  ☆99Updated 7 years ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆85Updated last year