sipeed / TangMega-138K-exampleLinks
TangMega-138K-example project
☆40Updated 2 months ago
Alternatives and similar repositories for TangMega-138K-example
Users that are interested in TangMega-138K-example are comparing it to the libraries listed below
Sorting:
- Tang Mega 138K Pro examples☆70Updated 2 months ago
- DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.☆55Updated last year
- DDR3 Controller v1.65, 16 read/write ports, configurable widths, priority, auto-burst size & cache on each port. VGA/HDMI multiwindow vi…☆79Updated last year
- An open source PSRAM/HyperRAM controller for Sipeed Tang Nano 9K / Gowin GW1NR-LV9QN88PC6/15 FPGA☆77Updated 2 years ago
- Minimal DVI / HDMI Framebuffer☆82Updated 4 years ago
- Basic USB 1.1 Host Controller for small FPGAs☆90Updated 5 years ago
- SDRAM controller with AXI4 interface☆94Updated 5 years ago
- Small (Q)SPI flash memory programmer in Verilog☆63Updated 2 years ago
- Basic Peripheral SoC (SPI, GPIO, Timer, UART)☆64Updated 5 years ago
- Generic FPGA SDRAM controller, originally made for AS4C4M16SA☆80Updated 4 years ago
- A set of Wishbone Controlled SPI Flash Controllers☆82Updated 2 years ago
- A compact USB HID host FPGA core supporting keyboards, mice and gamepads.☆128Updated 3 months ago
- A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.☆38Updated last year
- Basic USB-CDC device core (Verilog)☆80Updated 4 years ago
- An FPGA-based HDMI display controller. 基于FPGA的HDMI显示控制器☆57Updated 11 months ago
- Portable HyperRAM controller☆55Updated 6 months ago
- HDMI core in Chisel HDL☆51Updated last year
- Wishbone interconnect utilities☆41Updated 4 months ago
- TangPrimer-25K-example project☆42Updated 8 months ago
- USB 1.1 Host and Function IP core☆23Updated 10 years ago
- A DDR3(L) PHY and controller, written in Verilog, for Xilinx 7-Series FPGAs☆72Updated 2 years ago
- USB 2.0 FS Device controller IP core written in SystemVerilog☆36Updated 6 years ago
- Another tiny RISC-V implementation☆56Updated 3 years ago
- 3D graphics rendering system for FPGA, the project contains hardware rasterizer, software geometry engine, and application middleware.☆85Updated 4 years ago
- Open-source high performance AXI4-based HyperRAM memory controller☆75Updated 2 years ago
- This ARMv4-compatible CPU core is written in synthesiable verilog.It could launch uCLinux and Linux in MODELSIM. It has high Dhrystone be…☆88Updated 4 years ago
- TangNano-20K-example☆116Updated last year
- FPGA Logic Analyzer and GUI☆133Updated 2 years ago
- Single/Multi-channel Full Speed USB interface for FPGA and ASIC designs☆173Updated last year
- Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC☆88Updated 6 years ago