mprymek / allwinner-baremetalLinks
Example baremetal programs for Allwinner H3/H2+ boards.
☆11Updated 6 years ago
Alternatives and similar repositories for allwinner-baremetal
Users that are interested in allwinner-baremetal are comparing it to the libraries listed below
Sorting:
- Decompiled DDR memory init for Allwinner Tech T113-s3 SoC☆11Updated 3 years ago
- Opensource embedded controller firmware for sipeed boards.☆43Updated 6 years ago
- CH552 Dual USB to Serial Bridge.☆78Updated last year
- Dfu-utils GD32 fork.☆42Updated 5 years ago
- Fork of OpenOCD that has RISC-V microcontroller support☆36Updated last week
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 3 years ago
- Buildroot for the LicheePi Zero board☆34Updated 7 years ago
- A working test for USB serial on the GD32VF103 chips. Tested on Longan Nano☆17Updated 5 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆48Updated 4 years ago
- CH32V305 DAPLink - USB2.0 High Speed DAPLink firmware for the WCH-LinkE☆20Updated last year
- Boilerplates and examples for programming STM32 in ARM assembler☆18Updated 9 years ago
- Document for Tang Nano FPGA board☆58Updated 5 years ago
- Tang-Nano-examples☆68Updated 4 years ago
- WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader☆43Updated 5 years ago
- Connecting USB-VGA adapter to STM32☆32Updated 4 months ago
- USB-Blaster instance on CH55x MCU.☆51Updated 6 years ago
- usb-jtag - Altera USB Blaster Emulation with a FX2☆72Updated 2 weeks ago
- 8051 microcontroller☆40Updated 7 years ago
- RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …☆31Updated 4 years ago
- ☆35Updated 10 months ago
- Allwinner F1C100s/F1C200s reverse engineering and documentation☆42Updated 4 years ago
- Longduino is an Arduino port for gd32v mcu.☆69Updated 3 years ago
- ☆26Updated 6 years ago
- Example projects for the IAR RISC-V Evaluation Board☆29Updated 2 weeks ago
- Use gpio to emulate usb low-speed on stm32f030f4p6.Use internal rc instead of crystal.☆35Updated 8 years ago
- ☆43Updated 4 years ago
- A fork of the OpenOCD project, used to build the xPack OpenOCD☆62Updated 3 years ago
- 8086 PC (x86) emulator for STM32F429 MCU☆32Updated 2 years ago
- Easy to use STM32 development environment based on opensource tools☆14Updated 2 years ago
- Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python☆33Updated 6 years ago