Alternatives and similar repositories for toolchain-demo:

Users that are interested in toolchain-demo are comparing it to the libraries listed below

• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆21Updated last year
• StereoNinja / StereoNinjaFPGA
  Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board
  ☆30Updated last year
• lethalbit / kicad-pdk-libs
  KiCad symbol library for sky130 and gf180mcu PDKs
  ☆32Updated last year
• openXC7 / demo-projects
  Demo projects for various Kintex FPGA boards
  ☆55Updated 2 weeks ago
• colognechip / gatemate_ila
  The ILA allows you to perform in-system debugging of your designs on the GateMate FPGA at runtime. All signals of your design inside the …
  ☆50Updated 3 months ago
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆28Updated last year
• RobertBaruch / amaranth-tutorial
  ☆41Updated 2 years ago
• splinedrive / kianFpgaPong
  Basic Pong you can extend with rotary, sound, vga generator and autopilot
  ☆11Updated 3 years ago
• openXC7 / nextpnr-xilinx
  Experimental flows using nextpnr for Xilinx devices
  ☆45Updated last week
• aesc-silicon / i2c-gpio-expander
  End-to-End Open-Source I2C GPIO Expander
  ☆31Updated last month
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆65Updated 7 months ago
• cr1901 / sentinel
  Another size-optimized RISC-V CPU for your consideration.
  ☆58Updated this week
• blackmesalabs / sump3
  sump3 logic analyzer
  ☆19Updated last week
• GuzTech / misato
  RISC-V Processor written in Amaranth HDL
  ☆37Updated 3 years ago
• amaranth-lang / rtl-debugger
  VS Code based debugger for hardware designs in Amaranth or Verilog
  ☆38Updated 5 months ago
• nand2mario / usb_hid_host
  A compact USB HID host FPGA core supporting keyboards, mice and gamepads.
  ☆122Updated last month
• mbalestrini / gds2gcode
  ☆23Updated last year
• machdyne / lowe
  Löwe FPGA Board
  ☆12Updated last year
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆38Updated 4 years ago
• mole99 / greyhound-ihp
  Greyhound on IHP SG13G2 0.13 μm BiCMOS process
  ☆28Updated 3 weeks ago
• amaranth-farm / amlib
  assorted library of utility cores for amaranth HDL
  ☆88Updated 7 months ago
• meiniKi / FazyRV
  A minimal-area RISC-V core with a scalable data path to 1, 2, 4, or 8 bits and manifold variants.
  ☆91Updated 8 months ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆86Updated 6 years ago
• chili-chips-ba / openXC7-TetriSaraj
  Demo of how to use https://github.com/openXC7 tools (yosys+nextpnr-xilinx) to implement the HW side of a custom SoC with RISC-V CPU & our…
  ☆25Updated 2 months ago
• efabless / clear
  ☆69Updated 8 months ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆77Updated 2 months ago
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆72Updated 10 months ago
• esden / summon-fpga-tools
  A simple script to build open-source FPGA tools.
  ☆15Updated 5 years ago
• mattvenn / logLUTs
  Tool to parse yosys and nextpnr logfiles to then plot LUT, flip-flop and maximum frequency stats as your project progresses.
  ☆20Updated last year
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 2 years ago