Alternatives and similar repositories for RobotX

Users that are interested in RobotX are comparing it to the libraries listed below

• glumb / mrc
  MicroPede robot controller 🤖🖥👾
  ☆105Updated 6 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 8 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆27Updated 8 years ago
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆63Updated 5 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆154Updated 11 years ago
• XRobots / PerformanceRobots
  ☆38Updated 5 years ago
• XRobots / openDogV2
  ☆237Updated 3 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆82Updated 2 years ago
• maxosprojects / open-dobot
  open-dobot - Open Firmware, Driver and SDK for Dobot Arm
  ☆145Updated 5 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• LuSeKa / HoverBot
  Self-balancing robot using hoverboard hub motors
  ☆118Updated 3 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆111Updated 7 years ago
• NiryoRobotics / niryo_stepper
  ☆48Updated 7 years ago
• AliShug / EvoArm
  An open-source 3D-printable robotic arm
  ☆154Updated 6 years ago
• OpenBionics / Robot-Hands
  Affordable (< 100$), light-weight (< 200 gr), adaptive, underactuated robot hands
  ☆130Updated 10 years ago
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆66Updated 2 years ago
• Rhoban / Metabot
  Open-source DIY parametric robot
  ☆69Updated 6 years ago
• MarginallyClever / Delta-Robot
  Hobby scale for teaching basic robot concepts
  ☆37Updated 10 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 7 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆33Updated 3 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆87Updated 10 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆140Updated 6 months ago
• NiryoRobotics / niryo_one_ros
  Niryo One ROS stack
  ☆251Updated 3 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆113Updated 5 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆72Updated 4 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago
• AngelLM / Asgard
  GUI for Thor developed using PyQt5
  ☆27Updated 5 months ago
• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆100Updated 8 years ago
• mjbots / mjmech
  ☆77Updated 5 years ago
• XRobots / SonicRobot
  ☆30Updated 3 years ago