Alternatives and similar repositories for ForceControlledGripper01

Users that are interested in ForceControlledGripper01 are comparing it to the libraries listed below

• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆63Updated 5 years ago
• XRobots / openDogV2
  ☆236Updated 3 years ago
• neuroprod / InsectRobotSimulation
  hexapod
  ☆304Updated last year
• XRobots / RobotX
  All the things for RobotX
  ☆126Updated 7 years ago
• XRobots / Actuator_Linear
  ☆27Updated 6 years ago
• XRobots / CycloidalDrive
  ☆202Updated last year
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆352Updated 10 months ago
• cguweb-com / Arduino-Projects
  ☆143Updated last year
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆53Updated 3 years ago
• XRobots / SonicRobot
  ☆29Updated 3 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆70Updated 4 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆362Updated 4 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆69Updated 6 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• avbotics / Spot-Micro-Control-and-Animation
  Inverse Kinematics based control and animation of Spotmicro developped in Python for Raspeberry Pi
  ☆135Updated 3 years ago
• XRobots / openDogV3
  ☆436Updated 2 years ago
• poppy-project / poppy-ergo-jr
  🤖 Poppy Ergo Jr is an open-source robotic arm based on modular 3D printed conception and low-cost XL-320 motors.
  ☆208Updated 3 years ago
• XRobots / 3D_R2_Public
  3D Print CAD files from XRobots.co.uk/R6
  ☆161Updated 9 years ago
• XRobots / PerformanceRobots
  ☆38Updated 5 years ago
• MarginallyClever / Robot-Overlord-App
  Simulation and control software for robots
  ☆198Updated last week
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆79Updated last year
• antdroid-hexapod / antdroid
  Antdroid robot ROS repository
  ☆70Updated 8 years ago
• XRobots / BallContraption
  ☆77Updated 4 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆228Updated 4 years ago
• XRobots / miniDog
  ☆56Updated 5 years ago
• Chris-Annin / ROS_AR2_moveit_config
  ROS moveit config files for the AR2 robot
  ☆16Updated 7 years ago
• mithi / hexy
  Code for a hexapod robot
  ☆90Updated 6 years ago
• XRobots / BB83_Public
  Parts for my V3 BB-8 as I make them
  ☆56Updated 8 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆41Updated 8 years ago
• XRobots / ServoSmoothing
  ☆200Updated 4 years ago