Alternatives and similar repositories for BB83_Public

Users that are interested in BB83_Public are comparing it to the libraries listed below

• XRobots / 3D_BB8_Public
  Files for the XRobots BB8 project
  ☆93Updated 10 years ago
• XRobots / BB82_public
  BB8 Version 2!
  ☆70Updated 9 years ago
• XRobots / 3D_R2_Public
  3D Print CAD files from XRobots.co.uk/R6
  ☆164Updated 10 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆129Updated 7 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆375Updated 4 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆72Updated 4 years ago
• BCN3D / BCN3DSigma-Mechanics
  All the mechanics of the BCN3D Sigma 3D Printer.
  ☆105Updated 7 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆162Updated 9 years ago
• MeArm / MeArm
  Laser cut files for MeArm
  ☆189Updated 2 years ago
• bq / zum
  Electronic boards compatible with Arduino
  ☆128Updated 8 years ago
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆64Updated 5 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆73Updated 6 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆43Updated 8 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆152Updated 11 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆95Updated 7 years ago
• thunderbug1 / Spherebot-Host-GUI
  Qt based GUI to control the spherebot
  ☆54Updated 7 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 8 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆87Updated 10 years ago
• NiryoRobotics / niryo_one
  ☆401Updated 5 years ago
• davidhend / Hexapod
  ☆35Updated 8 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆113Updated 5 years ago
• Strooom / GRBL-Post-Processor
  Post Processor for Autodesk Fusion360, delivering GCODE output optimized for GRBL compatible CNC or Lathe
  ☆128Updated last year
• vorpalrobotics / VorpalHexapod
  Arduino code for both the Vorpal Hexapod and Vorpal Hexapod Gamepad.
  ☆141Updated 4 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆232Updated 5 years ago
• LaserWeb / deprecated-LaserWeb3
  Open Source Laser Cutter / Engraver software. Supports gcode, svg, dxf, stl, png, jpg, bmp
  ☆274Updated 8 years ago
• yorkhackspace / meArm
  Inverse kinematics control library for Phenoptix meArm
  ☆122Updated 5 years ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆75Updated 8 years ago
• im-pro-at / cncgcodecontroller
  CNC-GCode-Controller
  ☆152Updated 2 years ago
• CollettivoCocomeri / Felfil-Evo
  Evolved open source DIY 3D printer filament extruder
  ☆76Updated 4 years ago
• jpraus / wirebender
  Precise wire bending CNC machine for wires at 1mm and less in diameter.
  ☆194Updated 6 years ago