Alternatives and similar repositories for TeslaBMSV2:

Users that are interested in TeslaBMSV2 are comparing it to the libraries listed below

• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 3 years ago
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆13Updated 9 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆86Updated 2 years ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆63Updated 11 months ago
• burra / byd_battery
  Try to reverse a BYD battery system
  ☆24Updated 2 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆50Updated 4 months ago
• sebdehne / DehneEVSE-Firmware
  Arduino firmware for DehneEVSE charging station
  ☆59Updated 2 years ago
• dalathegreat / Nissan-Leaf-Bruteforce-Upgrade
  Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF
  ☆22Updated 4 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• jens18 / lgresu
  LG Resu 10 LV Monitor
  ☆29Updated 5 years ago
• sebdehne / DehneEVSE-Hardware
  DehneEVSE - EV Type 2 Charging station
  ☆14Updated 3 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆74Updated last month
• dalathegreat / Nissan-LEAF-Inverter-Upgrade
  Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF
  ☆66Updated last month
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated last year
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆30Updated 3 months ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆113Updated this week
• aaronsb / victronvenussupport
  Support files for managing and deploying my Victron Venus OS stuff
  ☆19Updated 4 years ago
• Lyve1981 / GrowattUsbModbus
  Growatt ModBus => MQTT translation service
  ☆23Updated last year
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆15Updated 11 months ago
• KlausLi / Esp-Seplos-Controller
  Seplos Controller mit Webseite Der Esp8266 ist über ein Rs485 Modul mit dem Seplos BMS verbunden und kann diesem seine Daten entlocken. S…
  ☆26Updated 2 years ago
• Batrium / WatchMonUdpListener
  WatchMon UDP Binary Listener translates to JSON and stores to influxdb
  ☆30Updated 2 years ago
• madsci1016 / SMAVenusDriver
  A driver to integrate SMA SunnyIsland inverters with Victron Venus OS
  ☆15Updated last year
• jkairys / growatt-esp8266
  Growatt Inverter monitoring via MQTT using ESP8266 modbus interface
  ☆66Updated 4 years ago
• rand12345 / solax_can_bus
  ☆14Updated last year
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆137Updated this week
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆77Updated last month
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆42Updated last year
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆42Updated 3 years ago
• Tom-evnut / VW-bms
  Can based decoding of VW bms data
  ☆34Updated 10 months ago
• flip555 / bms_connector
  BMS Connector Integration for Home Assistant
  ☆9Updated 8 months ago