Alternatives and similar repositories for Outlander-PHEV:

Users that are interested in Outlander-PHEV are comparing it to the libraries listed below

• Tom-evnut / OutlanderPHEVBMS
  Control Over the Mistubishi Outlander CMU modules
  ☆21Updated 9 months ago
• kolyandex / CAN-to-USB-lawicel-for-stm32
  CAN to USB adapter using Lawicel/Canhacker protocol.
  ☆23Updated 5 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆30Updated 6 months ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆36Updated 10 months ago
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated last year
• Isaac96 / CHAdeMOSoftware
  Software for Damien Maguire's CHAdeMO controller
  ☆20Updated 4 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆35Updated 3 weeks ago
• autowp / CANreader
  Android CAN client
  ☆60Updated 7 years ago
• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆15Updated last year
• mdrobnak / cpcontrol-redacted
  Redacted code for Rust-based Charge Port Controller
  ☆11Updated 4 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆31Updated 11 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated last year
• damienmaguire / Tesla-Model-3-Charge-Port-Controller
  Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU
  ☆20Updated 3 years ago
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆20Updated 3 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• smartgauges / canbox
  Firmware for canbus boxes
  ☆82Updated last year
• jamiejones85 / ESP32-Chademo
  ESP32 Based Chademo implementation
  ☆14Updated 6 months ago
• EliasKotlyar / Canfilter
  Can Filter with STM32F105RBT Reverse Engeneering
  ☆35Updated 2 years ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆24Updated 5 months ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 5 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆22Updated 4 years ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆77Updated 3 months ago
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆12Updated last year
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆61Updated 4 years ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆40Updated last year
• FL0WL0W / ESP32C3-CAN-Extender
  ☆19Updated 2 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆33Updated last year
• gicking / LIN_master_Arduino
  LIN master node emulation with preemptive background operation
  ☆33Updated 4 months ago