Alternatives and similar repositories for ProjectKerosene

Users that are interested in ProjectKerosene are comparing it to the libraries listed below

• helium / longfi-platformio
  ☆16Updated 10 months ago
• takeabyte / helium_mapper_grafana
  Customisation for Helium Mapper to upload to Mqtt > Nodered > influx > grafana
  ☆12Updated 2 years ago
• helium / longfi-arduino
  ☆63Updated 3 years ago
• arkieguy / RAK4631-Helium-Mapper
  Example code for a LPWAN tracker based on the RAK WisBlock products
  ☆17Updated 3 years ago
• miqueet / helium_miner_scripts
  This repo was made out of the need to auto update DIY helium miners
  ☆46Updated 3 years ago
• helium / console-decoders
  Payload decoder functions for console.
  ☆60Updated last year
• beegee-tokyo / WisBlock-API
  WisBlock API takes care of all the LoRaWAN, BLE, AT command functionality. It makes development of event driven power savings application…
  ☆32Updated 2 years ago
• beegee-tokyo / RAK4631-LPWAN-Tracker
  Example code for a LPWAN tracker based on the RAK WisBlock products
  ☆10Updated 4 years ago
• JasonRJ / RAK7200_Helium_Mapper
  RAK7200 Helium Mapper - S76G SiP (STM32l073RX, SX1276, CXD5603GF)
  ☆11Updated 4 years ago
• helium / sx1302_hal
  SX1302 Hardware Abstraction Layer and Tools (packet forwarder...)
  ☆40Updated last year
• RAKWireless / RUI_LoRa_node_payload_decoder
  This decoder can be used for all LoRa nodes which are built based on RUI.
  ☆28Updated 4 years ago
• disk91 / WioLoRaWANFieldTester
  ☆89Updated 11 months ago
• helium / gateway-mfr-rs
  ☆19Updated last year
• Seeed-Solution / TTN-Payload-Decoder
  ☆24Updated 2 years ago
• RAKWireless / RAK811_BreakBoard
  RAKwireless,RAK811,BreakBoard,GPS tracker,Low power,Open source
  ☆5Updated 3 years ago
• Carniverous19 / helium_analysis_tools
  various tools for analyzing hotspot or PoC activity
  ☆50Updated 2 years ago
• helium / lorawan-sniffer
  ☆19Updated 2 years ago
• disk91 / Disk91_LoRaE5
  Ardunio LoRa E5 driver for WIO and other Boards
  ☆25Updated last year
• RAKWireless / RAK2245_for_helium
  RAK2245 for helium
  ☆21Updated 4 years ago
• jas-williams / CubeCell-Helium-Mapper
  ☆48Updated 3 years ago
• RAKWireless / Awesome-WisBlock
  Learn how to make a custom WisBlock Sensor or IO module. Share your custom boards here.
  ☆32Updated 3 weeks ago
• myDevicesIoT / cayenne-docs
  The Cayenne documentation system
  ☆45Updated 3 years ago
• helium / lora_gateway
  Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
  ☆12Updated last year
• beegee-tokyo / RAK4631-LoRa-BLE-Config
  Example how to configure LORa/LoRaWAN of a WisBlock Core RAK4631 over BLE
  ☆17Updated 4 years ago
• aureleq / SigfoxLoRa_Murata
  Application example to send both Sigfox and LoraWAN messages using Murata module
  ☆11Updated 2 years ago
• xoseperez / standalone-lorawan-gateway-balena
  Deploys the The Things Stack LoRaWAN Network Server Open Source Edition, BasicStation and Backend tools using Balena.
  ☆25Updated last year
• jthiller / CubeCell-Helium-vindriktning-particle-sensor
  Helium LoRaWAN data reporting via a Heltec Cubecell for the Ikea VINDRIKTNING PM2.5 air quality sensor
  ☆27Updated 2 years ago
• FloVid / LoRa_GPS_Tracker
  Script for the RAK4631 core to send GPS data and battery value to TTN or ChirpStack
  ☆8Updated 3 years ago
• helium / virtual-lorawan-device
  A utility that attaches to a Semtech UDP Host and pretends to be a LoRaWAN Device
  ☆26Updated 9 months ago
• AmedeeBulle / pyrak811
  RAK811 Python 3 library for Raspberry Pi
  ☆51Updated 3 years ago