Alternatives and similar repositories for solax_can_bus:

Users that are interested in solax_can_bus are comparing it to the libraries listed below

• Tom-evnut / VW-bms
  Can based decoding of VW bms data
  ☆34Updated 9 months ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆69Updated last month
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆42Updated last year
• yasko-pv / gw-ev
  A BMS communication bridge between GoodWe GW6000-EH inverter and EV battery (Chevy Volt).
  ☆10Updated 3 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆30Updated 2 months ago
• jsphuebner / esp-egycounter
  ☆16Updated 2 months ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated last year
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆79Updated 2 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆42Updated 3 years ago
• jens18 / lgresu
  LG Resu 10 LV Monitor
  ☆29Updated 5 years ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆85Updated 2 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆50Updated 4 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆70Updated last year
• spot2000 / Volkswagen-MEB-EV-CAN-parameters
  ☆28Updated 7 months ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆81Updated last month
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆12Updated 10 months ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆177Updated 3 months ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆136Updated last week
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆33Updated 2 years ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆75Updated 2 weeks ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆17Updated 2 years ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆29Updated 4 months ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆113Updated this week
• dingo35 / ha-SmartEVSEv3
  Integrate SmartEVSEv3 with HomeAssistant through custom component
  ☆15Updated 6 months ago
• rnorth / sofar-inverter-control
  ESPHome control and monitoring of Sofar solar inverter
  ☆16Updated last year
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆19Updated 4 years ago
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆58Updated 3 years ago
• playersz28 / JBD-ESP32
  ESP32 interface for JBD BMS
  ☆12Updated 2 years ago