MiaowLabs / MWbalanced-firmware-none
MWbalanced 8051 control source code with no RTOS.
☆41Updated 8 years ago
Alternatives and similar repositories for MWbalanced-firmware-none:
Users that are interested in MWbalanced-firmware-none are comparing it to the libraries listed below
- BLE, IMU and LED Development Kit,Use nRF51822 + MPU6500 + WS2812B☆51Updated 8 years ago
- GRBL0.8c移植于stm32,已调式通过☆35Updated 8 years ago
- 飞控固件移植到rtthread☆52Updated 8 years ago
- Littlebuzz微型四轴飞行器源代码(不含操作系统)☆22Updated 8 years ago
- 低成本(RMB 7元左右)12V的bldc驱动电路。基于STC15W401AS单片机。☆26Updated 6 years ago
- 一个原创的12864OLED专用的迷你GUI。包括菜单页面,功能页面;可显示二值图片和图表,进行整数和小数参数调整,适合于飞思卡尔智能车比赛使用。☆25Updated 8 years ago
- 基于 RTT 的 BeepPlayer 的软件包☆35Updated 6 years ago
- 该驱动板支持:霍尔无刷驱动、感应电动势无刷驱动、simpleFOC、直流减速电机改舵机,多样性功能,性价比高☆58Updated 3 years ago
- Crazepony remote control source code with no RTOS.☆65Updated 9 years ago
- MicroPython port for RT-Thread on STM32F4 board☆10Updated 3 years ago
- 插上usb变成一个普通的移动u盘,将带升级的应用文件加密后丢进u盘,断电完成升级☆16Updated 8 years ago
- ☆24Updated 9 years ago
- STM32 Stepper Motor driver☆79Updated 10 years ago
- a package of mpu6xxx driver library, compatible with mpu6000, mpu6050, mpu6500, mpu9250 and other chips.☆26Updated 8 months ago
- a balance car with two wheels based on rt-thread☆31Updated 5 years ago
- ☆44Updated 6 years ago
- STM32 MPU6050 Balance Car V1.0 7.29 直立车 平衡车☆27Updated 7 years ago
- 暴力升级你的 ST-Link 及 STM32CubeIDE☆102Updated 2 years ago
- 串口和stlink二合一调试工具。☆97Updated 8 years ago
- 飞控固件☆22Updated 7 years ago
- 基于STLinkV2/1的STM32编程器和flash烧写器☆84Updated 8 years ago
- PID控制算法V1.0 2018.5.28☆7Updated 6 years ago
- STM32平台的无线下载功能开发☆26Updated 5 years ago
- 一个简易的单片机编程框架☆32Updated 5 years ago
- 无刷小风扇☆26Updated 3 years ago
- 标量Kalman滤波器的C语言实现; C implementation of Scalar Kalman Filter☆34Updated 10 years ago
- K210 四层板 0603 PCB工程☆53Updated 4 years ago
- awtk在stm32f103ze平台上的移植。☆59Updated 2 months ago
- Bootloader for stm32f10x,IAP by usart3☆36Updated 5 years ago
- stm32 development on linux and macOS☆56Updated 8 years ago