Alternatives and similar repositories for Hardware

Users that are interested in Hardware are comparing it to the libraries listed below

• TKJElectronics / XV11Lidar_STM32F429
  Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement
  ☆41Updated 10 years ago
• Zubax / gridsens_gs2
  Zubax GNSS module
  ☆56Updated 11 months ago
• KitSprout / SmartIMU-Nano
  IMU Development Kit，Nano version of SmartIMU
  ☆11Updated 8 years ago
• BeaglePilot / beaglepilot
  An autopilot for Linux-based computers based on the BeagleBone (Black)
  ☆109Updated 9 years ago
• linorobot / ros_dwm1000
  Indoor/Outdoor Positioning System based on Decawave's DWM1000 Ultra Wide Band transceivers.
  ☆76Updated 4 years ago
• dongfang / BGC32
  Open source 3 Axis Gimbal controller firmware
  ☆18Updated 11 years ago
• mpaperno / qgroundcontrol_aq
  AutoQuad ground control and setup application for Windows, OSX and Linux.
  ☆23Updated 8 years ago
• OpenMotorDrive / openmotordrive
  ☆10Updated 7 years ago
• mindbeast / rpi-mpu6050
  Simple C code for raspberry pi to read gyro, accelerometer, and temperature data from a mpu-6050 sensor.
  ☆9Updated 11 years ago
• openrobots-dev / uROSnode
  ☆80Updated 9 years ago
• UAVenture / ros-setups
  Scripts and documentation on how to setup a ROS system on various platforms, such as Odroid and Intel Edison.
  ☆17Updated 8 years ago
• ginge / OpenServoV4
  OpenServo Version 4
  ☆21Updated 12 years ago
• EEDrone / Firmware
  飞控固件
  ☆22Updated 8 years ago
• kaiqzhan / ardupilot-raspilot
  APM Plane, APM Copter, APM Rover source
  ☆75Updated 9 years ago
• paparazzi / ppm-encoder
  PPM Encoder board http://paparazzi.enac.fr/wiki/ATmega_PPM_Encoder_Board
  ☆31Updated 13 years ago
• xioTechnologies / x-IMU-GUI
  ☆33Updated 11 years ago
• vedderb / QuadcopterSystem
  The hardware and software for our quadcopter system
  ☆27Updated 9 years ago
• ROBOTIS-GIT / OpenCR-Hardware
  BOM, Circuit and PCB Gerber of OpenCR
  ☆119Updated 5 years ago
• bitcraze / crazyflie2-nrf-firmware
  Crazyflie 2.0 nRF51 firmware
  ☆67Updated 5 months ago
• EvvGC / Hardware
  Open Source 3 Axis Board Design files
  ☆90Updated 11 years ago
• ShilinGuo520 / flystm32_ardupilot
  ☆19Updated 6 years ago
• bitcraze / crazyflie2-stm-bootloader
  Crazyflie 2.0 STM32F4 bootloader
  ☆43Updated 2 years ago
• KitSprout / QCopterNano
  微型四軸飛行器 ( M2M ~80mm )
  ☆25Updated 10 years ago
• Xevel / NXV11
  Hacking of the Neato XV-11 lidar
  ☆84Updated 5 years ago
• BroboticsInc31 / LilBro
  Lil'Bro is a 3D printed, open source quadrupedal robot that allows researchers to duplicate,modify, and create new methods for the robot.…
  ☆18Updated 6 years ago
• smukkejohan / RTIMULib
  RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)
  ☆49Updated 4 years ago
• seamatech / arduino-bldc
  The brushless DC motor driver by arduino uno, suport sensored and sensorless BLDC motor
  ☆39Updated 2 years ago
• jytong / mpu6050Pi
  MPU6050 DMP driver for Raspberry Pi. Add a simple C++ interface, easy to use.
  ☆21Updated 8 years ago
• bn999 / autoquad
  Automatically exported from code.google.com/p/autoquad
  ☆19Updated 10 years ago
• husarion / hFramework
  hFramework is a library for creating real-time software for robotic & mechatronic devices
  ☆28Updated 5 years ago