MHageH / c_uart_interface
A heavy modification of the original c_uart_interface_example, works on ARM Cortex-M4 STM32F4 (as an offboard processor)
☆10Updated 8 years ago
Related projects: ⓘ
- ☆13Updated 5 years ago
- FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface☆14Updated last year
- Platform independent GPS drivers☆85Updated 3 weeks ago
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆52Updated last year
- ☆17Updated 9 years ago
- Open source UAVCAN RTK GPS, F9P, magnetometer, barometer, IMU, buzzer, and safety switch module.☆11Updated last year
- Tiny local positioning system with OpenMV cam☆18Updated 4 years ago
- STM32 (ARM) programmed using C for controlling a robot with servos and stepper motors using UART.☆12Updated 8 years ago
- Design files for Pixhack autopilot☆9Updated 9 years ago
- UAVCAN node base on FreeRTOS☆15Updated 5 years ago
- Teensy3.6 based flight control firmware☆25Updated 4 years ago
- Automatically exported from code.google.com/p/autoquad☆19Updated 9 years ago
- The Bitcraze website☆19Updated this week
- 96Boards camera support from Deltavison :☆40Updated 6 years ago
- AutoQuad ground control and setup application for Windows, OSX and Linux.☆24Updated 7 years ago
- Xilinx Zynq SoC based all-in-one quadrocopter flight controller. Stereo 720p side-by-side digital video transmission.☆13Updated 3 years ago
- A simple tool to send and receive mavlink packets from udp, tcp, serial, files...☆29Updated 2 years ago
- Zubax GNSS module☆50Updated 3 weeks ago
- Generic hardware designs☆23Updated 8 years ago
- UAVCAN is a lightweight protocol designed for reliable communication in aerospace and robotic applications via CAN bus.☆12Updated 3 years ago
- C++ inter-thread publish/subscribe middleware ported from PX4 and redesigned based on POSIX☆54Updated last year
- Altium designer project file of AirPi2 HAT☆25Updated 3 years ago
- 飞控固件☆20Updated 7 years ago
- Fork of Bill Nesbitt's AutoQuad Multicopter Flight Controller firmware☆50Updated 7 years ago
- Open source 3 Axis Gimbal controller firmware☆17Updated 10 years ago
- Lattice Crosslink FPGA is programmed to simulate an IMX219 image stream to a Jetson Nano☆15Updated 3 years ago
- JTAG/SWD debugger + UART adapter based on the Black Magic Probe firmware☆21Updated last month
- STM32 F4 Quadcopter Flight Software for AQ32 hardware☆36Updated 9 years ago
- This repository contains Embedded Linux kernel source code for Xilinx devices.☆20Updated last week
- Fork of ChibiOS for ArduPilot☆62Updated 2 weeks ago