Alternatives and similar repositories for PSoC4-MCU-Analog-Designs

Users that are interested in PSoC4-MCU-Analog-Designs are comparing it to the libraries listed below

• bveina / Rigol-Scope-Snap
  Application to manipulate and take screenshots of rigol Oscilliscopes via the SCPI interface.
  ☆15Updated 3 years ago
• hydrabus / HydraSCA-LISN
  HydraSCA-LISN Dedicated Hardware 5uH Dual DC-LISN for Side-channel Analysis (SCA)
  ☆12Updated last year
• iDoka / asic-pinout-drawer
  Simple pin assignment generator for IC case
  ☆19Updated 8 years ago
• bkerler / antsdr_new
  Latest firmware for antsdr E310 based on PlutoSDR
  ☆13Updated 2 years ago
• Werni2A / CadenceOSHW
  Open Source Layouts, Footprints, Schematics, Libraries, ... for Cadence Products
  ☆11Updated 2 years ago
• Wren6991 / Hazard3-SWD-SoC
  Example Hazard3 + OpenDAP RISC-V SWD SoC integration
  ☆9Updated 2 years ago
• saleae / spi-analyzer
  Saleae Serial Peripheral Interface (SPI) Analyzer
  ☆20Updated last year
• stffrdhrn / uart
  Verilog uart receiver and transmitter modules for De0 Nano
  ☆18Updated 10 years ago
• danupp / fpgasdr
  FPGA firmware for FPGA radio baseband board. Scroll down for README.
  ☆16Updated 5 years ago
• saleae / one-wire-analyzer
  Saleae 1-Wire Analyzer
  ☆11Updated last year
• sylvainlebras / EMC-Tools
  Tools to Build your own EMC Lab
  ☆13Updated last year
• snikrepmada / DECA
  DECA Altera Max 10 FPGA Labs
  ☆12Updated 9 years ago
• MR-DOS / MWGEN-G1
  12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
  ☆15Updated 3 years ago
• ultraembedded / riscv_sbc
  A RISC-V SBC based around the LambdaConcept USB2Sniffer FPGA board.
  ☆29Updated 5 years ago
• tedyapo / ugly-smd-adapters
  Eagle PCB designs for adapting SMD parts to ugly (or Manhattan) style breadboarding
  ☆14Updated 8 years ago
• eez-open / CF-DIC
  Current-fed dual inductor converter with wide input and output voltage range
  ☆19Updated 6 years ago
• cyrozap / python-boundary-scan-tools
  Python tools to interact with boundary scan-capable devices. Useful for reverse engineering, testing, etc.
  ☆16Updated 9 years ago
• panStamp / kicad
  Kicad projects
  ☆13Updated 6 years ago
• sigrokproject / sigrok-dumps
  Read-only mirror of the official repo at git://sigrok.org/sigrok-dumps. Pull requests welcome. Please file bugreports at sigrok.org/bugzi…
  ☆19Updated 7 months ago
• ultraembedded / core_usb_sniffer
  USB capture IP
  ☆21Updated 4 years ago
• enjoy-digital / thunderscope
  LiteX based FPGA gateware for Thunderscope.
  ☆25Updated last year
• smillier / HydraLINCAN
  Hydrabus Shield for LIN and CAN Buses
  ☆34Updated 2 years ago
• noahp / bin2hex
  Simple binary file to Intel HEX file converter (bin to hex)
  ☆22Updated 5 years ago
• regymm / ymmcu-ft2232
  FT2232HL JTAG & UART Downloader
  ☆14Updated 3 years ago
• Stanlazy / ZYNQ_Ruler
  Yet Another XC7Z010 Board
  ☆17Updated 3 years ago
• loxodes / phasenoise
  Prototype phase noise analyzer
  ☆19Updated 4 years ago
• ATmega8 / kiterf
  Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.
  ☆24Updated 5 years ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• ngscopeclient / scopehal-docs
  End user documentation for libscopehal
  ☆12Updated last month
• tomverbeure / cisco-hwic-3g-cdma
  Reverse Engineering of the Cisco HWIC-3G-CDMA PCB
  ☆40Updated last year