Forty-Bot / ethernetLinks
WIP 100BASE-TX PHY
☆76Updated 9 months ago
Alternatives and similar repositories for ethernet
Users that are interested in ethernet are comparing it to the libraries listed below
Sorting:
- A bit-serial CPU written in VHDL, with a simulator written in C.☆129Updated last year
- Glacial - microcoded RISC-V core designed for low FPGA resource utilization☆86Updated 5 years ago
- Playground for VGA projects on Tiny Tapeout☆64Updated 3 weeks ago
- Line rate Ethernet interface for RP2XXX.☆118Updated 5 months ago
- Minimax: a Compressed-First, Microcoded RISC-V CPU☆222Updated last year
- An implementation of a CPU that uses a Linear Feedback Shift Register as a Program Counter instead of a normal one☆52Updated 3 months ago
- ☆96Updated 4 years ago
- My own FPGA architecture simulated in VHDL, realized with 7400-logic on PCB.☆43Updated last year
- Documenting Lattice's 28nm FPGA parts☆144Updated last year
- Hardware definition language that compiles to Verilog☆106Updated 3 years ago
- PCIe Endpoint on Xilinx 7-Series FPGAs with the PCIE_2_1 hard block and GTP transceivers☆54Updated 4 months ago
- Turbo9 - Pipelined 6809 Microprocessor IP☆160Updated last month
- 👇 Add capacitive touch buttons to any FPGA!☆102Updated 3 years ago
- An attempt to recreate the RP2040 PIO in an FPGA☆302Updated last year
- i8080 precise replica in Verilog, based on reverse engineering of real die☆158Updated 6 years ago
- A configurable RTL to bitstream FPGA toolchain☆42Updated last week
- The Zylin ZPU☆245Updated 10 years ago
- Pano Logic G2 Reverse Engineering Project☆144Updated 4 years ago
- Bootloader for Fomu☆103Updated 2 years ago
- Small footprint and configurable embedded FPGA logic analyzer☆185Updated 3 months ago
- Soft USB for LiteX☆50Updated 2 years ago
- PanoLogic Zero Client G1 reverse engineering info☆75Updated last year
- Port of Stephen A. Edwards's Apple2fpga to PYNQ-Z1 (Xilinx Zynq FPGA), to emulate an Apple II+.☆43Updated 3 years ago
- A collection of tools for developing for Fomu☆83Updated 2 years ago
- A template project for the ULX3S ECP5 FPGA board using only Open Source Software☆13Updated 6 years ago
- ULX3S FPGA, RISC-V, ESP32 toolchain installer scripts☆39Updated 4 years ago
- A FPGA core for a simple SDRAM controller.☆122Updated 3 years ago
- FPGA Odysseus with ULX3S☆67Updated last year
- A modern and open-source cross-platform software for chips reverse engineering.☆265Updated 9 months ago
- SatCat5 is a mixed-media Ethernet switch that lets a variety of devices communicate on the same network.☆465Updated last month