Alternatives and similar repositories for PicoStepper

Users that are interested in PicoStepper are comparing it to the libraries listed below

• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆66Updated 8 months ago
• Expatria-Technologies / PicoBOB
  Low-cost and simple GRBLHAL to MACH3 BOB bridge for Raspberry Pi Pico
  ☆27Updated 10 months ago
• qwertpas / O32controller
  Miniature closed-loop controller for brushless DC motors
  ☆31Updated last year
• RinthLabs / MaxFeeder
  Arduino Mega shield for controlling part feeders for Open PNP
  ☆34Updated 11 months ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆161Updated last month
• roTechnic / CycloidalDesign
  ☆24Updated 3 years ago
• opulo-inc / paste-extruder
  Paste extruder head for the LumenPnP
  ☆58Updated 4 months ago
• multigcs / riocore
  riocore
  ☆65Updated last week
• Igitigit2 / SimpleCanLib
  CAN bus library for ESP32 and STM32 G431
  ☆35Updated last year
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆44Updated 4 years ago
• kingoflolz / linear-actuator-firmware
  ☆31Updated 3 years ago
• Vendelator / RP2040_PIO_Steppermotors
  Synchronized PIO Programs for stepper motors. 4 Motors possible.
  ☆23Updated 3 years ago
• photonfirmware / photon
  Open-Source firmware for pick and place feeders
  ☆69Updated last week
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆153Updated last week
• Andrew-Dickinson / photonic-etcher
  Generate exposure masks for Anycubic printers from PCB Gerbers
  ☆100Updated last year
• kingoflolz / linear-actuator-hardware
  ☆66Updated 3 years ago
• wntrblm / jellyfish-and-starfish
  ☆110Updated 3 years ago
• sequoia-hope / open_linear_motor
  Design files for a brushless linear motor project I worked on mostly from 2010-2012
  ☆28Updated 4 years ago
• Rack-Robotics / Powercore-V1.0-Firmware
  ☆35Updated 2 years ago
• microsmt / Microsmt-PNP-hardware
  All documents about making microsmt pnpboard
  ☆63Updated last month
• markmaker / PushPullFeeder
  All 3d-Printed Tape&Reel Feeder
  ☆81Updated last year
• atomic14 / kicad-coil-plugins
  Some simple plugins for generating stator coils in kicad
  ☆111Updated last year
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆76Updated 3 months ago
• SupaCoder / 0816-Lumen-SMT-Feeder-Remix
  0816 SMT Automatic Feeder modified to work with the OpuloPNP. Custom firmware written for an arduino nano with a servo sheild can run 12 …
  ☆16Updated 3 years ago
• knifter / DualPID
  Multi Channel Configurable PID regulator on M5Stack Core
  ☆50Updated last year
• dining-philosopher / litefeeder
  Semi-automatic passive printable/castable feeder for LitePlacer
  ☆59Updated 5 years ago
• charlie-x / eakins-camera
  controlling the eakins microscope camera via sockets
  ☆58Updated last year
• luni64 / MicroMod_3.2
  NXP MK20DX256 board for the Sparkfun MicroMod system. Should be able to run Teensy 3.2 firmware
  ☆16Updated 5 years ago
• hstarmans / hexastorm
  Amaranth HDL framework for laser scanner with motion control
  ☆30Updated this week
• luni64 / mmStep
  Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.
  ☆13Updated 5 years ago