Alternatives and similar repositories for pyUblox:

Users that are interested in pyUblox are comparing it to the libraries listed below

• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆93Updated 6 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆89Updated 4 years ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆75Updated 3 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 4 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆57Updated 11 months ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆177Updated 5 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• jcmb / RTCM3
  System for Parseing RTCM3.x packets
  ☆46Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆90Updated last week
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆44Updated 11 months ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
  ☆98Updated this week
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆144Updated 4 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆52Updated last year
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated 9 months ago
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆92Updated 10 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆102Updated 6 months ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆81Updated this week
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 7 months ago
• ruffsl / RTKLIB-Tools
  Tools for RTKLIB
  ☆29Updated 10 years ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆49Updated 7 months ago
• swift-nav / piksi_tools
  Tools for the Piksi GNSS receiver.
  ☆36Updated last year
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆86Updated last week
• drotek / SMARTNAV-RTK
  Drotek SMARTNAV RTK - Hardware and Software - Open Source centimeter level positioning
  ☆39Updated 7 years ago
• Aceinna / python-openimu
  Aceinna OpenIMU python driver, data logging, and web socket server
  ☆50Updated last year
• JensReimann / rtklib-qt
  obsolete
  ☆14Updated 8 years ago
• ethz-asl / rtklibros
  rtklib with ros interfacing and adapted feedback from external Kalman filter
  ☆46Updated 9 years ago
• Aceinna / ublox_decoder
  Decode Ublox M8L data
  ☆33Updated 4 years ago