Alternatives and similar repositories for ntripcaster:

Users that are interested in ntripcaster are comparing it to the libraries listed below

• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆69Updated 9 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆93Updated 6 years ago
• baidu / ntripcaster
  ☆46Updated 7 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆103Updated 7 months ago
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• tisyang / ntripcaster
  Ntrip broadcaster written in c and libev
  ☆63Updated 5 years ago
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆24Updated 4 years ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 4 years ago
• jcmb / RTCM3
  System for Parseing RTCM3.x packets
  ☆46Updated 5 years ago
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆56Updated 9 years ago
• jdesbonnet / GNSS_RTK
  Software, scripts and data relating to GNSS/GPS Real Time/Post-Processed Kinematic sat nav
  ☆26Updated 3 months ago
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 2 years ago
• Aceinna / ublox_decoder
  Decode Ublox M8L data
  ☆33Updated 4 years ago
• nunojpg / ntripcaster
  Standard Ntrip Broadcaster
  ☆64Updated 5 years ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆38Updated 6 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆58Updated last year
• tisyang / cors-relay
  CORS系统中继重分发程序
  ☆45Updated 4 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
  ☆102Updated last week
• vasimv / rtkzedf9p
  Simple utility to enable internal RTK mode in Ublox ZED-F9P GPS receiver with RTKLIB-compatible output
  ☆14Updated 5 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆52Updated last year
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆91Updated last month
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆89Updated 4 years ago
• DoubleString / VrsCaster
  Caster based on rtklib 2.4.3,including self-defined vrs mode
  ☆20Updated 5 years ago
• dusk0r / EasyNtrip
  EasyNtrip NTRIP Server
  ☆16Updated 7 years ago
• CentipedeRTK / RtkBaseVar
  🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍
  ☆19Updated last year
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆51Updated 9 months ago
• charlesquick / ntripcaster-containerised
  Another containerised ntripcaster!
  ☆19Updated 6 months ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago