Alternatives and similar repositories for ublox:

Users that are interested in ublox are comparing it to the libraries listed below

• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated 11 months ago
• tridge / pyUblox
  python Ublox module
  ☆105Updated last year
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆92Updated 2 months ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆20Updated 7 months ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 4 years ago
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆91Updated this week
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
  ☆103Updated last week
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆77Updated 3 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆60Updated last year
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆146Updated 4 years ago
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆12Updated 6 months ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆43Updated last year
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 9 months ago
• sparkfun / SparkFun_u-blox_GNSS_v3
  An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
  ☆68Updated last month
• septentrio-gnss / mosaicHAT
  Mosaichat: an open source Raspberry Pi HAT based on Septentrio's mosaic-X5
  ☆54Updated 9 months ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆53Updated 2 years ago
• roice / ntripcaster
  Modified from ntripcaster 0.1.5, Fixed the socket length compiling error.
  ☆25Updated 10 years ago
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 2 years ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• sparkfun / Qwiic_Ublox_Gps_Py
  ☆79Updated 3 months ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆44Updated last year
• tomojitakasu / SCH63T_MINI_EVK
  ☆22Updated 3 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆31Updated this week
• septentrio-gnss / Septentrio_AgnosticCorrectionsProgram
  ☆15Updated 3 weeks ago
• eringerli / RpiNtripBase
  ☆50Updated 4 years ago
• jancelin / RTKlibDroid
  Rtklib for android linux (Userland)
  ☆25Updated 4 years ago