Alternatives and similar repositories for RTKLIB-QT:

Users that are interested in RTKLIB-QT are comparing it to the libraries listed below

• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆93Updated 5 years ago
• JensReimann / RTKLIB
  Port of RTKLIB GUI to Qt
  ☆39Updated last year
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆177Updated 5 years ago
• emlid / RTKLIB
  Emlid's fork of Tomoji Takasu's RTKLIB used in Reach RTK receiver
  ☆75Updated 3 years ago
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆101Updated 5 months ago
• nunojpg / ntripserver
  Ntrip Version 2.0 Command Line Server
  ☆69Updated 9 years ago
• nunojpg / rtcm3torinex
  Real-time converter from NTRIP streamed RTCM3 data to RINEX
  ☆56Updated 9 years ago
• tisyang / ntripcaster
  Ntrip broadcaster written in c and libev
  ☆62Updated 4 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
  ☆96Updated 2 weeks ago
• u-blox / ublox-C099_F9P-uCS
  ☆60Updated 4 years ago
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆90Updated 10 years ago
• nunojpg / ntripcaster
  Standard Ntrip Broadcaster
  ☆65Updated 5 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆52Updated last year
• DfAC / AndroidGNSS
  Code supporting raw ranges for the Android
  ☆43Updated 5 years ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• tisyang / cors-relay
  CORS系统中继重分发程序
  ☆45Updated 4 years ago
• JensReimann / rtklib-qt
  obsolete
  ☆14Updated 8 years ago
• drotek / SMARTNAV-RTK
  Drotek SMARTNAV RTK - Hardware and Software - Open Source centimeter level positioning
  ☆39Updated 6 years ago
• illarionov / RtkGps
  Playing with rtklib on android
  ☆141Updated 2 years ago
• baidu / ntripcaster
  ☆45Updated 6 years ago
• jcmb / NTRIP
  NTRIP, VRS, IBSS Tools
  ☆44Updated 9 months ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• semuconsulting / pyrtcm
  Python library for parsing RTCM 3 protocol messages.
  ☆81Updated last week
• ruffsl / RTKLIB-Tools
  Tools for RTKLIB
  ☆28Updated 10 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆57Updated 10 months ago
• tyler123durden / rtklib
  RTKLIB modifications for embedded systems
  ☆13Updated 11 years ago
• jcmb / RTCM3
  System for Parseing RTCM3.x packets
  ☆46Updated 5 years ago
• TheGalfins / GNSS_Compare
  A novel framework for processing raw GNSS measurements on an Android smartphone
  ☆67Updated 5 years ago
• Node-NTRIP / rtcm
  Decoder/encoder for all RTCM 3 message types up to RTCM 3.3 Amendment 1 (c10403.3).
  ☆43Updated last year
• SGL-UT / gnsstk
  The goal of the gnsstk project is to provide an open source library to the satellite navigation community--to free researchers to focus o…
  ☆125Updated 5 months ago