Alternatives and similar repositories for mdebug

Users that are interested in mdebug are comparing it to the libraries listed below

• smunaut / iua
  ice40 USB Analyzer
  ☆58Updated 4 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆33Updated 3 years ago
• azonenberg / staticnet
  C++ TCP/IP and SSH stack with bounded run time and no dynamic memory allocations
  ☆40Updated 3 weeks ago
• cortexprog / cortexprogfw
  ☆27Updated 4 years ago
• Wren6991 / OpenDAP
  ☆23Updated 2 years ago
• mithro / valentyusb
  USB Full-Speed core written in migen/LiteX
  ☆17Updated 5 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• markrages / svd_gdb
  Decode SVD files to talk to microcontrollers through a debug probe.
  ☆18Updated last year
• sipeed / sigrok_slogic
  sigrok_slogic
  ☆15Updated last month
• Wren6991 / TwoWireDebug
  Yet Another Debug Transport
  ☆21Updated 3 years ago
• majbthrd / DapperMiser
  lightweight CMSIS-DAP implementation
  ☆17Updated 5 years ago
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 11 months ago
• 360nosc0pe / scope
  Siglent SDS1x0xX-E FPGA bitstreams
  ☆41Updated 5 months ago
• mithro / fx2-ftdi-emulation
  Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).
  ☆14Updated 6 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆26Updated 2 years ago
• icebreaker-fpga / icebreaker-v2-usb-firmware
  Firmware to implement USB communications on the CH32V307 microcontroller
  ☆11Updated 2 years ago
• pengi / arm_gdb
  Python module for an easier access to analyze ARM Cortex-M peripherals
  ☆25Updated 2 months ago
• raspberrypi / armulet
  ☆17Updated 9 months ago
• ECP5-PCIe / ECP5-Utils
  Utilities for the ECP5 FPGA
  ☆18Updated 3 years ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆32Updated last year
• carrotIndustries / svdregview
  Point-and click access to MCU peripheral registers
  ☆24Updated 2 years ago
• cyrozap / psoc-bitstream-parsing-tools
  Parse the programmable logic configuration of PSoC devices
  ☆11Updated 7 years ago
• dehre / stm32f3-tiny-rtos
  A Tiny RTOS Simply Explained
  ☆32Updated 2 years ago
• dl3yc / fx2fw-sdcc
  FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2
  ☆22Updated 10 years ago
• lambdaconcept / usbsniffer
  Gateware for USB2Sniffer
  ☆29Updated 4 years ago
• ulixxe / usb_dfu
  Full Speed USB DFU interface for FPGA and ASIC designs
  ☆17Updated last year
• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆33Updated 6 years ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆43Updated 2 years ago
• mithro / kicad-length-matching-checks
  Couple of scripts which checks length matching of your KiCad design.
  ☆26Updated 8 years ago