Alternatives and similar repositories for cortexprogfw

Users that are interested in cortexprogfw are comparing it to the libraries listed below

• cortexprog / cortexproghw
  ☆19Updated 5 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• smdprutser / SWM050
  ☆19Updated 7 years ago
• arturo182 / tinyuf2
  An open source cross-platform UF2 bootloader based on the TinyUSB library
  ☆27Updated 5 years ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆54Updated 2 weeks ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 4 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆37Updated last year
• gregdavill / gsd-kicad-libs
  GsD style kicad Libraries
  ☆11Updated 5 years ago
• debug-edge / DebugEdge
  A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
  ☆43Updated 4 years ago
• jeanthom / stlink-tool
  Firmware uploader for ST-Link
  ☆70Updated last year
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 3 years ago
• lupyuen / bluepill-bootloader
  MakeCode UF2 bootloader for STM32 Blue Pill
  ☆77Updated 2 years ago
• HonghongLu / CH554
  8051 microcontroller
  ☆40Updated 7 years ago
• glassboard-dev / gl-glasslink-hardware
  DAPLink (CMSIS-DAP) compatible hardware
  ☆19Updated 3 years ago
• blackmagic-debug / blackmagic-hardware
  Hardware design files for the Black Magic Probe
  ☆128Updated 3 years ago
• markrages / svd_gdb
  Decode SVD files to talk to microcontrollers through a debug probe.
  ☆18Updated last year
• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆33Updated 6 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆34Updated 6 years ago
• eggman / rtl_ameba_gcc_sample
  ☆21Updated 9 years ago
• pysigrok / pysigrok
  Python reimplementation of sigrok core
  ☆30Updated 2 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• koendv / SerialWireOutput
  Serial Wire Output (SWO) library for STM32duino arm Arduinos
  ☆20Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• hydrausb3 / hydrausb3_fw
  HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…
  ☆84Updated 2 years ago
• NordicPlayground / nrf-doom
  ☆43Updated last year
• DangerousPrototypes / Bus_Pirate_Ultra
  Just messing with an FPGA
  ☆25Updated 5 years ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 4 years ago
• AddioElectronics / QSPI-Analyzer
  Analyzer for low level debugging of the QSPI Protocol, for use with Saleae and Kingst Logic Analyzers.
  ☆24Updated last year
• joeltroughton / nanoAmmeter
  A small ammeter for measuring printed glucose biosensors
  ☆26Updated 4 years ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago