arturo182 / tinyuf2Links
An open source cross-platform UF2 bootloader based on the TinyUSB library
☆27Updated 4 years ago
Alternatives and similar repositories for tinyuf2
Users that are interested in tinyuf2 are comparing it to the libraries listed below
Sorting:
- Simple demo firmware for the RISC-V GD32VF103☆29Updated 4 years ago
- Discussion, files, spec, and more for a M.2 standard for makers☆34Updated 4 years ago
- Tool for selecting voltage divider components given constraints and a list of available resistors☆31Updated 2 years ago
- HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …☆32Updated last year
- ☆27Updated 4 years ago
- ☆20Updated 8 years ago
- Low-cost ECP5 FPGA development board☆77Updated 4 years ago
- A curated list of Open Source PMOD boards☆44Updated 5 years ago
- C++ TCP/IP and SSH stack with bounded run time and no dynamic memory allocations☆40Updated last month
- ice40 USB Analyzer☆58Updated 4 years ago
- CH32V UF2 bootloader☆46Updated 9 months ago
- CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs☆16Updated 2 years ago
- verilog core for ws2812 leds☆33Updated 3 years ago
- SCPI commands tools☆36Updated 6 years ago
- Farpatch debugger software layer, backed by Black Magic☆52Updated 2 months ago
- Femto ESP32 Micro USB☆33Updated 4 years ago
- KiCad bus length matching script.☆30Updated 11 months ago
- Low-area DVI experiment for iCE40 UP5k and HX1k FPGAs☆31Updated 3 years ago
- microcontroller-based FPGA / JTAG programmer☆76Updated 5 months ago
- ☆24Updated 4 years ago
- Audio out with an FTDI UART cable☆43Updated 4 years ago
- quake for k210☆46Updated 6 years ago
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe!☆19Updated 8 years ago
- KiCad Plugin to package gerbers ready for ordering☆36Updated 2 years ago
- Point-and click access to MCU peripheral registers☆24Updated 2 years ago
- Kicad plugin to lay out components as they are in the schematic☆26Updated 6 years ago
- Couple of scripts which checks length matching of your KiCad design.☆26Updated 8 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆35Updated 6 years ago
- ☆19Updated 6 years ago
- Reverse Engineering of the Cisco HWIC-3G-CDMA PCB☆40Updated last year